The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Cali Fuel and Carburettors

Sort by Title

Sort by Price

Page 11 of 12

1 2 3 4 5 6 7 8 9 10 11 12

Fuel Pipe Assembly

FUA30570 Fits Cali 1100 (1994-1997)

Dimensions:
Pipes 18mm OD and 14mm OD

Fuel pipe / hose assembly including 'T' junction

This part is available by special order, request a quote

30106570 GU30106570 30 10 65 70
3010 6570 3010.6570 30.10.65.70

£67.00

INC VAT

£55.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Fuel Hose Return Pipe

FUA30770 Fits Cali EV (1997-2000), Cali 1100 (1994-1997)

Dimensions:
460mm overall length, 15mm ID at threaded end

Fuel return hose

This part is available by special order, request a quote

30108770 GU30108770 30 10 87 70
3010 8770 3010.8770 30.10.87.70

£88.90

INC VAT

£74.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Performance Air Filter K & N

SIA28367 Fits Le Mans 1000, Cali 3, Strada 750, Spada 3, 1000S, Lario, Imola 2, Monza 2, V75 4 Valve

Dimensions:
150mm x 110mm x 47mm

K&N high performance air filter

High Air Flow with Excellent Filtration
Designed to Increase Horsepower and Acceleration
Washable and Reusable
Will NOT Void Vehicle Warranty
Lasts up to 50,000 miles before cleaning is required depending on driving conditions
K&N Million Mile Limited Warrantyï¿½
Emissions Legal
Economical, a K&N Air Filter Will Last the Life of Your Bike
Works with Original Equipment Manufacturer Vehicle Electronics
Easy High Performance Add-on
Environmentally Friendly

This part is available by special order, request a quote

28113660-z 28113660 GU28113660 28 11 36 60
2811 3660 2811.3660 28.11.36.60

£67.00

INC VAT

£55.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Remotely Operated Petrol Tap

TAA29450 Fits Cali 3 Carb

Dimensions:
21mm threaded section, 153mm linkage from fuel tap to brass head of cable

Manually operated fuel tap or fuel valve for models with carbs. Includes cable and remote side panel mounted knob

These new taps have a linkage that may be shorter than the original tap. In this case, you will need to swap over the linkage from your old tap and re-use it. Before using the tap you will need to release it by rotating the brass section behind the tap by quarter of a turn (anti-clockwise)

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

29105450 GU29105450 29 10 54 50
2910 5450 2910.5450 29.10.54.50

£35.00

INC VAT

£29.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Accelerator Pump Inlet Valve PHF Carbs

FUA14930 Fits Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, Convert, G5, Cali 2, Cali 3, Mille GT, Strada 1000, Cali 1100

Dimensions:
7mm thread, 13mm high

Dellorto accelerator pump inlet valve for PHF carbs

This part is available by special order, request a quote

£11.00

INC VAT

£9.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Kit Plastic

FUA30612 Fits Le Mans 1, Le Mans 2, Spada 3, Strada 1000, Cali 3 Classic, Cali 1100 Carb

Dimensions:
Accepts a 44mm OD carb

Plastic inlet manifold, replaces unavailable aluminium manifold. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. PHF36 carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts

This part is available by special order, request a quote

£45.00

INC VAT

£37.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Float Pivot Pin

FUA17346 Universal Part

Dimensions:
47mm long

Pivot pin / needle suitable for PHF / VHB / PHM and PHBH carbs

Float pin also known as Guzzi ref. 17933167, 061527346

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

13933100 GU13933100 13 93 31 00
1393 3100 1393.3100 13.93.31.00

£13.50

INC VAT

£11.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Rubber Late PHM 40

FUA28361 Fits 850/1000 ALL Models, 1100 Sport Carb

Dimensions:
45mm ID x 38mm length

Special Inlet rubber with HT lead guide for late Dellorto PHM carbs with a inlet stub OD of 46mm

Use clip SSA45970
This part will only fit late PHM40 carbs with 46mm inlet stubs, we recommend measuring your carbs before ordering

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

£35.00

INC VAT

£29.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle Body to Inlet Sleeve Rubber

FUA30466 Fits Bellagio 940, Cali 1100 (1994-1997), Cali EV (1997-2014), Cali Stone, Cali Classic, Cali Aquila Nera

Dimensions:
60mm OD at inlet sleeve

Rubber used to link airbox to inlet tube FUG30560 behind throttle body

This part is available by special order, request a quote

30114660 GU30114660 30 11 46 60
3011 4660 3011.4660 30.11.46.60

£15.00

INC VAT

£12.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Breather Pipe 50cm

ENA27982 Universal Part

Dimensions:
6mm ID x 9mm OD x 50cm length

50cm Ariete fuel or breather pipe suitable as fuel pipe on gravity fed non injection models

Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

£3.00

INC VAT

£2.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 11 of 12

1 2 3 4 5 6 7 8 9 10 11 12