Shop headings: New Spares | Used Spares | Accessories | Brands
This section contains fuel pipes, carb overhaul kits, carb and injection system spares, fuel filters and inlet rubbers
Complete right hand PHF 30 carb, supplied ready to fit with cable adjuster. Suitable as a replacement for the discontinued square slide VHB30 carb
Jetted to suit your model.
M48 x 1.25 Threaded air intake connection.
44mm Rubber sleeve type engine connection.
Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 28112644 and 28112600.
Use FUA30611 manifold kit. For cables use CAA17562 with standard plastic twinpull twistgrip or CAA20000 with Tommaselli 2C twistgrip
This part is available by special order, request a quote
28112610 GU28112610 28 11 26 10
2811 2610 2811.2610 28.11.26.10
£333.00
INC VAT
£277.50 EX VAT
Complete left hand PHF 30 carb, supplied ready to fit with cable adjuster. Suitable as a replacement for the discontinued square slide VHB30 carb
Jetted to suit your model.
M48 x 1.25 Threaded air intake connection.
44mm Rubber sleeve type engine connection.
Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 28112645.
Use FUA30611 manifold kit. For cables use CAA17562 with standard plastic twinpull twistgrip or CAA20000 with Tommaselli 2C twistgrip
This part is available by special order, request a quote
28112611 GU28112611 28 11 26 11
2811 2611 2811.2611 28.11.26.11
£333.00
INC VAT
£277.50 EX VAT
Manual square bodied fuel tap with nut, washer and filter. Fits left or right hand side of tank.
Off, on and reserve positions. Approved for use with fuel containing ethanol.
Availability varies on this part, check availability
14105400-z 14105400 GU14105400 14 10 54 00
1410 5400 1410.5400 14.10.54.00
£40.00
INC VAT
£33.33 EX VAT
Plastic inlet manifold, replaces unavailable aluminium manifold. Suitable for PHF 30 carb conversions on models previously fitted with VHB30 carbs. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. Carb mounts direct to this manifold (no inlet manifold rubber required)
Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts. Can be used to replace PHF30 inlet manifolds 17116265 and 17116365 which are no longer available. These manifolds exit the heads at a different angle to VHB manifolds and in some cases you may need to modify side panels to allow clearance for air filters
2 in stock
£39.00
INC VAT
£32.50 EX VAT
Dellorto V9 slide needle for VHB 30 carbs
Standard needle clip position is 2nd groove from top
This part is due back in stock soon, call 01484 841395 to reserve yours
13937700 GU13937700 13 93 77 00
1393 7700 1393.7700 13.93.77.00
£24.00
INC VAT
£20.00 EX VAT
Pod type air filter for increased air flow
Made from a high performance twin layer foam this K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable (use hot soapy water). Best run dry for road. Fits VHB 29, VHB 30, PHBH28 and PHBH30 Dellorto carbs. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter
This part is available by special order, request a quote
£23.00
INC VAT
£19.17 EX VAT
Dellorto 8.5g float with tang for needle valve
Most Guzzi big twins originally had 10g floats- see FUA14001
3 in stock
14933000 GU14933000 14 93 30 00
1493 3000 1493.3000 14.93.30.00
£22.50
INC VAT
£18.75 EX VAT
Carb mounted flip choke with plunger, lever, O ring, casting and spring. Insufficient clearance on high top carbs to operate the choke and the throttle cable
Fits all PHF30 - PHF36 and VHB30 Dellorto flat top carbs, contains rubber seat insert. Allows you to eliminate the choke cables and any handlebar choke controls for a cleaner look, especially suitable for special builds
2 in stock
14937800 GU14937800 14 93 78 00
1493 7800 1493.7800 14.93.78.00
£21.80
INC VAT
£18.17 EX VAT
Fuel pipe assembly including 'x' crossover piece
See FUA00004 for pipe clips. Can also be used in place of Guzzi ref. 12106501 on Loop frame models if cut to length
1 in stock
29106500-z 29106500 GU29106500 29 10 65 00
2910 6500 2910.6500 29.10.65.00
Also fits Guzzi V7 Special, V7 700
£20.00
INC VAT
£16.67 EX VAT
S&B air filter. Large circular K & N type air filter with chromed back, includes clip. Designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable. Best run dry for road. Fits square bodied VHB 30 carbs.
Either ENA14700 or ENA14157 can be used as a breather box to replace the unit in the airbox. See SIA00095 if you require a longer narrower filter with the same ID. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter
More than 5 in stock
£19.80
INC VAT
£16.50 EX VAT