Shop headings: New Spares | Used Spares | Accessories | Brands
Black centre stand bracket for long Mistral silencers
Replaces left hand silencer bracket. Not suitable for V7 850 Special Edition
1 in stock
£25.00
INC VAT
£20.83 EX VAT
Satin finish centre stand bracket for long Mistral silencers
This part is available by special order, request a quote
£25.00
INC VAT
£20.83 EX VAT
Satin finish centre stand bracket for short Mistral silencers
This part is available by special order, request a quote
£25.00
INC VAT
£20.83 EX VAT
This adjustable fuelling modifier uses the lambda sensor signal to the ECU. By modifying that signal it achieves an improvement in low and midrange throttle response. Comes with wiring harness and instruction manual, installation is simple and does not require any specialist tools. Suitable for all single throttle body V7, V9 and V85 TT models.
Rapid Bike EASY: A base level simple plug and play modulator equipped with a microprocessor managing the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate power gaps typical of the low and medium rpm range.
See installation instructions here.
This part is available by special order, request a quote
£149.00
INC VAT
£124.17 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is available by special order, request a quote
£150.00
INC VAT
£125.00 EX VAT
Pair of short reverse cone stainless steel performance silencers from Mistral, the polished reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
5kg lighter that stock silencers
Increased power
Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
This part is available by special order, request a quote
£750.00
INC VAT
£625.00 EX VAT
Pair of short reverse cone stainless steel performance silencers from Mistral, the satin finish reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
5kg lighter that stock silencers
Increased power
Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
This part is available by special order, request a quote
£750.00
INC VAT
£625.00 EX VAT
Pair of short reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
5kg lighter that stock silencers
Increased power
Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers.You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
This part is available by special order, request a quote
£750.00
INC VAT
£625.00 EX VAT
Pair of reverse cone stainless steel performance silencers from Agostini. The polished finish reverse cone design compliments the classic styling of the V7 models, the silencers are shorter than the original silencers. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding pair of silencers.
4kg lighter that stock silencers
Benefit from increased power and torque
Release the music in your Guzzi!
Euro 5 compliant
No remap required
No remapping required
Pair of Agostini Mandello short pipe style silencers specifically designed for Moto V7 850 in stainless steel and customized with the laser engraved Agostini Mandello del Lario logo.
These silencers are specially designed to be mounted directly on the attachment points of the original silencers without the need for any modification; They are also expressly designed to enhance the performance of the Mandello twin cylinders. On all the models for which they are designed, they guarantee an increase in performance and a lowering of the rpm at which maximum power is obtained, allowing the bike to breathe much better at all rpm.
All silencers are equipped with a removable dbkiller.
Inside the packaging there are instructions and the certificate of approval
Availability varies on this part, check availability
£750.00
INC VAT
£625.00 EX VAT
Pair of long reverse cone stainless steel performance silencers from Mistral. The polished finish reverse cone design compliments the classic styling of the V7 models and the silencers are a similar length to the original silencers. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding pair of silencers.
4kg lighter that stock silencers
Benefit from increased power and torque
Release the music in your Guzzi!
Euro 5 compliant
No remap required
2BHP power increase at 5000rpm
No remapping required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34384 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
This part is available by special order, request a quote
£775.00
INC VAT
£645.83 EX VAT