Shop headings: New Spares | Used Spares | Accessories | Brands
Black O ring used in drive box and gearbox on small twins, engine on Daytona and Centauro
More than 5 in stock
90706188 GU90706188 90 70 61 88
9070 6188 9070.6188 90.70.61.88
£1.00
INC VAT
£0.83 EX VAT
Black phase sensor O ring
Also known as Guzzi ref. 847180 timing sensor o ring
More than 5 in stock
90706141 GU90706141 90 70 61 41
9070 6141 9070.6141 90.70.61.41
£2.00
INC VAT
£1.67 EX VAT
O ring, various applications including dipstick on small twins and fork top on Le Mans 1000 and Cali 1100.
More than 5 in stock
90706282 GU90706282 90 70 62 82
9070 6282 9070.6282 90.70.62.82
£1.00
INC VAT
£0.83 EX VAT
UFI 25 531 00 cartridge oil filter for 1989 on small block engines. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick
For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer). Some 750 XPA models use SIA19530, we advise you to check your old filter before ordering. Also known as Guzzi ref. 2A000633
More than 5 in stock
27153085 GU27153085 27 15 30 85
2715 3085 2715.3085 27.15.30.85
£9.50
INC VAT
£7.92 EX VAT
Piston for oil pressure relief valve in lower crankcase
This part is due back in stock soon, call 01484 841395 to reserve yours
31150950 GU31150950 31 15 09 50
3115 0950 3115.0950 31.15.09.50
£12.00
INC VAT
£10.00 EX VAT
Oil return pipe with threaded union for sump
Can be used in place of GU32159310 on late V7 models if pipe is cut and breather valve from old pipe inserted into cut section.
Uses crush washer SIA12200
1 in stock
27159360-z 27159360 GU27159360 27 15 93 60
2715 9360 2715.9360 27.15.93.60
£13.20
INC VAT
£11.00 EX VAT
Oil return pipe with threaded union for sump
Equivalent to Guzzi ref. B063213
Uses crush washer SIA12200. NB breather valve no included - you should reuse the valve from your old pipe. Superceded by ENA27360 (cut to length)
Sorry, this part is no longer available.
32159310-z 32159310 GU32159310 32 15 93 10
3215 9310 3215.9310 32.15.93.10
Sorry this item is out of production
Rear crank oil seal
Fits Nevada 750 from engine LT017877 and Nevada 350 from PC053625. NB Original specification 12mm seal no longer in production, our seal is 10mm thick. Superceded by Guzzi ref. 886365
4 in stock
04000500-z 04000500 GU04000500 04 00 05 00
0400 0500 0400.0500 04.00.05.00
£13.20
INC VAT
£11.00 EX VAT
Piston ring compressing tool, compresses piston rings to fit into bore. Without this tool you risk snapping piston rings, the tool also speeds up the fitting of new rings
For 57mm - 125mm bores, supplied with hex key for bore adjustment. Not suitable for CARC models
This part is available by special order, request a quote
£48.00
INC VAT
£40.00 EX VAT
Set of piston rings
This part is available by special order, request a quote
31060616 GU31060616 31 06 06 16
3106 0616 3106.0616 31.06.06.16
£150.00
INC VAT
£125.00 EX VAT