Shop headings: New Spares | Used Spares | Accessories | Brands
Aluminium plug for timing cover
This part is available by special order, request a quote
30002100 GU30002100 30 00 21 00
3000 2100 3000.2100 30.00.21.00
£12.20
INC VAT
£10.17 EX VAT
Piston ring compressing tool, compresses piston rings to fit into bore. Without this tool you risk snapping piston rings, the tool also speeds up the fitting of new rings
For 57mm - 125mm bores, supplied with hex key for bore adjustment. Not suitable for CARC models
This part is available by special order, request a quote
£48.00
INC VAT
£40.00 EX VAT
Used for camshaft sprocket pin and 5 speed gearbox selector pin
1 in stock
14234600 GU14234600 14 23 46 00
1423 4600 1423.4600 14.23.46.00
£13.80
INC VAT
£11.50 EX VAT
Rotational oil seal for crownwheel carrier in drive box on post 1974 big twins. Front crank oil seal on loop frame models
Also known as Guzzi ref. 90403850 and used on 850 GT and loop frame models for front crank oil seal ( 90403851 )
More than 5 in stock
90413850 GU90413850 90 41 38 50
9041 3850 9041.3850 90.41.38.50
£9.80
INC VAT
£8.17 EX VAT
Oil seal used as camshaft oil seal on Daytona and Centauro and gearbox seal on CARC models.
Gearbox output shaft seal on late V7 models. Also known as Guzzi ref. 90412541, 825238, AP8560030
3 in stock
90412541 GU90412541 90 41 25 41
9041 2541 9041.2541 90.41.25.41
£13.20
INC VAT
£11.00 EX VAT
Woodruff key for oil pump shaft
This part is due back in stock soon, call 01484 841395 to reserve yours
13148300 GU13148300 13 14 83 00
1314 8300 1314.8300 13.14.83.00
£3.30
INC VAT
£2.75 EX VAT
Single length of breather pipe used for oil return and breather applications depending on model.
Also known as Guzzi ref. 00823946060
1 in stock
28157550 GU28157550 28 15 75 50
2815 7550 2815.7550 28.15.75.50
£7.00
INC VAT
£5.83 EX VAT
8 sided UFI 23 287 00 cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
See SIA15301 for alternative filter from Mahle. Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 8 sided oil filter. Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump
See ENA90948 for the oil filter cover o ring
Availability varies on this part, check availability
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£10.00
INC VAT
£8.33 EX VAT
Cartridge oil filter UFI 23 149 00
Fits Daytona 1000 models where filter screws into base of sump. This is an 8 sided UFI filter.
Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump.
You may also require SIA10070 which is the crush washer for the drain plug and ENA14036 (sump gasket).
Please note that Daytona RS and T5 Polizia use filter SIA15300
More than 5 in stock
14153000 GU14153000 14 15 30 00
1415 3000 1415.3000 14.15.30.00
£10.50
INC VAT
£8.75 EX VAT
High quality German made Mahle OE quality cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring
More than 5 in stock
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£9.25
INC VAT
£7.71 EX VAT