Shop headings: New Spares | Used Spares | Accessories | Brands
This section contains gaskets, rings, shells, breather pipes and other engine parts
Kit containing 2 Litres of ENI i-Ride Racing SAE10W-60 synthetic engine oil and 1 litre of 75W-140 gearbox and final drive oil. This kit contains all the oil you will need to change your engine, gearbox and drive box oil.
Please note this kit CANNOT be posted outside of the UK mainland area
More than 5 in stock
£49.00
INC VAT
£40.83 EX VAT
Dimensions:
M8 x 48mm studs
Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers
The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come
More than 5 in stock
1A003632R
£22.00
INC VAT
£18.33 EX VAT
M8 schnorr washer, many applications
6 required for flywheel. Also known as Guzzi ref. 14615901
More than 5 in stock
14615901 GU14615901 14 61 59 01
1461 5901 1461.5901 14.61.59.01
£0.70
INC VAT
£0.58 EX VAT
Dimensions:
M6 x 35mm
A2 M6 x 35mm stainless steel socket cap screw used for timing cover,and gearbox cover on big twins. Also use for fitting our billet rocker cover protectors (ACA17941 / ACA14940)
Also used in place for Guzzi ref. 98680335 or 884039
More than 5 in stock
98690335 GU98690335 98 69 03 35
9869 0335 9869.0335 98.69.03.35
£1.20
INC VAT
£1.00 EX VAT
Dimensions:
14mm outer diameter x 10.4mm inner diameter x 1mm
M10 crush washer used for sump (small twins, V11 Sport), gearbox and drive box level and drain plugs. Also used for lower fork damper retaining bolt washer. Used for sump drain on Breva 1100, 1200, Griso etc...
Also known as Guzzi ref. 25656100, 01528930, AP9150472, 95100309, 887879, 25656102, 486075, AP8163091
These may be supplied as either aluminium or copper crush washers
More than 5 in stock
10528900 GU10528900 10 52 89 00
1052 8900 1052.8900 10.52.89.00
£0.50
INC VAT
£0.42 EX VAT
Aluminium crush washer for large sump drain and filler plugs (big twins)
We advise changing this at every oil change. Can be used in place of Guzzi ref. 90714195
More than 5 in stock
95100709 GU95100709 95 10 07 09
9510 0709 9510.0709 95.10.07.09
£1.00
INC VAT
£0.83 EX VAT
Dimensions:
M8 x 48mm x 1.25
Titanium M8 exhaust stud. The factory studs on these models are prone to corrosion so we recommend replacing now with these corrosion free titanium parts.
See Ti stud kit SSA85048 for replacement stud kit. Also known as Guzzi ref. 827018, AP8560061, B017636
More than 5 in stock
1A003632R
Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro
£5.00
INC VAT
£4.17 EX VAT
Dimensions:
17.12mm x 2.62mm
Black O ring
Many applications including clutch pushrod plunger O ring at rear of gearbox
More than 5 in stock
90706170 GU90706170 90 70 61 70
9070 6170 9070.6170 90.70.61.70
£0.80
INC VAT
£0.67 EX VAT
Dimensions:
46mm internal diameter x 3.5mm
O ring, used for oil filter cover on small twins
Also known as Guzzi ref. 90706460
More than 5 in stock
90706444 GU90706444 90 70 64 44
9070 6444 9070.6444 90.70.64.44
£0.90
INC VAT
£0.75 EX VAT
Dimensions:
8.3mm inner diameter x 1mm
M8 crush washer used for cylinder head oil lines and other applications, supplied in aluminium or copper
Can be used in place of copper crush washer 856046
More than 5 in stock
12154200 GU12154200 12 15 42 00
1215 4200 1215.4200 12.15.42.00
£0.60
INC VAT
£0.50 EX VAT
Secure online shopping 
