Shop headings: New Spares | Used Spares | Accessories | Brands
Exhaust gasket for standard downpipes, less expensive alternative to factory part
Copper gasket
1 in stock
852090 MG852090
Also fits Aprilia RSV4, Aprilia Tuono V4, Aprilia RS660
£6.00
INC VAT
£5.00 EX VAT
High pressure black fuel line / fuel line
Also known as Guzzi ref. 008239520800, 00823941078, GU00823952080. This high pressure fuel hose is rated to 10 Bar. Also see FUA80000 of a Y shaped connector or FUA80001 for a T shaped fuel line connector. R7 spec. E5 and E10 ethanol resistant
1 in stock
823952080
£12.00
INC VAT
£10.00 EX VAT
High pressure black fuel line / fuel line, can be used to replace fuel line on other models with 6mm ID fuel lines
This high pressure fuel hose is rated to 225 PSI. It has been designed for use with Modern Chemically Aggressive Bio-Ethanol Enriched Petrol Formulations (E5 & E10) As per currently served petrol pump petrol. Confirms to SAE J30 R7 and BS AU 108. See FUA00004 for hose clips and FUA80011 for a T piece to fit this pipe
This part is due back in stock soon, call 01484 841395 to reserve yours
AP8144069
£8.80
INC VAT
£7.33 EX VAT
High tensile flywheel bolt
6 required for flywheel
More than 5 in stock
19067700-z 19067700 GU19067700 19 06 77 00
1906 7700 1906.7700 19.06.77.00
£0.90
INC VAT
£0.75 EX VAT
Titanium M8 exhaust stud. The factory studs on these models are prone to corrosion so we recommend replacing now with these corrosion free titanium parts.
See Ti stud kit SSA85048 for replacement stud kit. Also known as Guzzi ref. 827018, AP8560061, B017636
More than 5 in stock
1A003632R
Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro
£5.00
INC VAT
£4.17 EX VAT
Dimensions:
M8 x 48mm x 1.25
M8 exhaust stud
Also known as Guzzi ref. 827018, AP8560061, B017636
This part is due back in stock soon, call 01484 841395 to reserve yours
1A003632R
Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro
£2.40
INC VAT
£2.00 EX VAT
Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers
The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come
More than 5 in stock
1A003632R
£22.00
INC VAT
£18.33 EX VAT
Stainless steel after market exhaust stud
M6 exhaust stud. See ENA31881 for stud nut. Note that unlike the originals these studs are threaded along their entire length.
More than 5 in stock
96506042 GU96506042 96 50 60 42
9650 6042 9650.6042 96.50.60.42
£3.60
INC VAT
£3.00 EX VAT
Exhaust stud, see ENA96043 for less expensive alternative
See ENA31880 for stud nut
This part is available by special order, request a quote
96506042 GU96506042 96 50 60 42
9650 6042 9650.6042 96.50.60.42
£9.30
INC VAT
£7.75 EX VAT
Aftermarket zinc coated exhaust stud with shorter plain section
See ENA31881 for stud nut and SSA96043 for a stainless steel alternative
Availability varies on this part, check availability
96506042 GU96506042 96 50 60 42
9650 6042 9650.6042 96.50.60.42
£3.00
INC VAT
£2.50 EX VAT