Brush kit for overhauling Bosch starter motor

The brush connections need to be soldered

 1 in stock

Speedo sensor with lead and 3 pin plug

Also known as Guzzi ref. 06765400. There are several variants of these sensors, please compare to the sensor on your bike or contact us with a chassis number before ordering

 1 in stock

 883768 MG883768

60/55W H4 P43T headlamp / headlight bulb

This is the more modern H4 bulb with three tabs . Also known as Guzzi ref. 292723

 1 in stock

 93450232 GU93450232 93 45 02 32
 9345 0232 9345.0232 93.45.02.32

6 pin male block connector, used for main loom connections. See ELA30001 for female 6 block connector.

 1 in stock

200073020

Motobatt quadflex 30Ah battery. Quadflex technology means you have two positive and two negative threaded terminals allowing maximum flexibility when installing. This powerful battery produces a massive 390 cranking amps, and is rated at 32 ah.

These sealed absorbed glass matt batteries have been used in military and off road applications for many years.
They offer increased lifespan, higher vibration resistance and electrical performance. This battery is also leak, vibration and spill proof if installed correctly.
Supplied fully charged and ready to fit.

NB This battery must not be trickle charged or charged using a traditional manual charger, AGM batteries require a smart charger - we recommend ACA96000
For more information on charging AGM batteries see these FAQ's.

This is a better value replacement for the Odyssey PC925 battery. Replaces Guzzi refs. 14704550, 18704550, 28704550, 28704545, 28704551, 28704552, 14704551, 14704500 and 14704505

One year warranty on all our Motobatt batteries.

Slightly taller than original loop frame battery so you may need to make some modification to retaining bracket

Please note this part CANNOT be posted outside of the UK mainland area

 1 in stock

03704540-z 03704540 GU03704540 03 70 45 40
 0370 4540 0370.4540 03.70.45.40

Dipped beam bulb H7 12V 55W for headlight

 1 in stock

AP8127109

Brakelight switch for handlebar mounted master cylinder

Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815 or ELA30860. Sometimes supplied with three terminals, in this instance disregard middle terminal. Please note that terminals are smaller than standard switch and will need to be soldered on.

 1 in stock

 30749860 GU30749860 30 74 98 60
 3074 9860 3074.9860 30.74.98.60

Ducati type regulator rectifier for models fitted with the later 350W Ducati charging system. Supplied wired with 1 x 4 pin and 1 x 2 pin block connector

Also known as Guzzi ref. 03703870. Note that some models have a different white connector block, if you have this connector then you will need to modify the connector to fit. This includes the mk 1 V7 Special and V7 Stone

 1 in stock

 32703810 GU32703810 32 70 38 10
 3270 3810 3270.3810 32.70.38.10

Hydraulic brakelight switch with M10 banjo bolt and 2 pin block connector

 1 in stock

 883192 MG883192

Threaded adapter base for oil pressure switches

See ENA12640 for crush washer

 1 in stock

 887123 MG887123