Shop headings: New Spares | Used Spares | Accessories | Brands
Reconditioned Valeo starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. Minor modification may be required on some pre 1990 models to make room for the solenoid. Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology. See , see this link for the modifications required to fit a Valeo starter to a 4 speed model.
This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address.
NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts.
Also known as Guzzi ref. 30730710
Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£155.00
INC VAT
£129.17 EX VAT
Brand new genuine Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016
Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
This is a genuine Valeo starter made in the EU- please do not confuse with the cheap Chinese copies that sometimes appear on eBay.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Please note you can get a discount of £30 on this item if you part exchange your existing faulty starter motor. See ELA30837 for less expensive alternative part
This part is due back in stock soon, call 01484 841395 to reserve yours
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£231.00
INC VAT
£192.50 EX VAT
Starter motor deposit, buy this deposit if you are buying one of our reconditioned starter motors and we haven't already received your servicable exchange unit. This deposit will be refunded once we receive your complete reconditionable Valeo or Bosch starter and solenoid
More than 5 in stock
£80.00
INC VAT
£66.67 EX VAT
Replacement solenoid for original Bosch starter motor.
Note that this solenoid has a bright zinc finsh
This part is due back in stock soon, call 01484 841395 to reserve yours
14730554 GU14730554 14 73 05 54
1473 0554 1473.0554 14.73.05.54
£37.50
INC VAT
£31.25 EX VAT
Old type 4 pin starter relay in metal case. Note that this has two large terminals and two smaller ones, depending on model you may need to fit wider spade connectors to fit this relay. See ELA10003 for large female spade connectors
This part is due back in stock soon, call 01484 841395 to reserve yours
12732500 GU12732500 12 73 25 00
1273 2500 1273.2500 12.73.25.00
£30.90
INC VAT
£25.75 EX VAT
Left hand Domino type switchgear with high and low beam, pass, indicator and horn switches. Same style switch as ELA01738
On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. An indication of wire colours is supplied with this switchgear. Supplied with 9 pin block connector. NB does not have lights off - park - on function, you need this to be on your RH switch (e.g. ELA01729 ) or run lights always on
This part is available by special order, request a quote
£88.00
INC VAT
£73.33 EX VAT
Right hand Domino type starter switch for use with separate throttle, e.g. Tommaselli twin pull throttles ACA10500 or ACA10501
On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. If replacing 'Lego' type switchgear (e.g. Le Mans 2, V50) with integrated twistgrip you will need a separate twistgrip, see ACA10500 and ACA10501. Packaging may include explanation of switchgear wire covers. This type originally fitted as standard to the early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear.. Molex connectors available separately.
This part is due back in stock soon, call 01484 841395 to reserve yours
01738800 GU01738800 01 73 88 00
0173 8800 0173.8800 01.73.88.00
£51.00
INC VAT
£42.50 EX VAT
Brand new right hand original "Lego" type switchgear and twistgrip with switches for starter and run/kill.
Previously unavailable new and ideal for your restoration project.
Comes with attached 4 pin molex connector, molex pins and rubber boot, ready to be plugged into your standard loom.
Twistgrip for standard dual throttle cables.
See ELA17061 and ELA14055 for left hand switches.
Sorry, this part is no longer available.
Sorry this item is out of production
Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder
Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'
1 in stock
£24.50
INC VAT
£20.42 EX VAT
Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder
NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060
1 in stock
£29.50
INC VAT
£24.58 EX VAT