Shop headings: New Spares | Used Spares | Accessories | Brands
Reconditioned Valeo starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. Minor modification may be required on some pre 1990 models to make room for the solenoid. Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology. See , see this link for the modifications required to fit a Valeo starter to a 4 speed model.
This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address.
NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts.
Also known as Guzzi ref. 30730710
Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£155.00
INC VAT
£129.17 EX VAT
Alternator stator for Bosch charging systems, this does not include the plate and brush holders
To fit this you will need to solder in the three wires from the windings. Replacement rotors and brushes also available. See ELA00503 for a complete higher output upgrade for your charging system
This part is available by special order, request a quote
17712400 GU17712400 17 71 24 00
1771 2400 1771.2400 17.71.24.00
£148.50
INC VAT
£123.75 EX VAT
Combined regulator rectifier to replace separate items on Bosch equipped models. See our wiring instructions page for help installing this reg/rec.
Includes harness extension with 6 spade connector block. NB this reg/rec should not be used with a lithium-ion battery
Sorry, this part is no longer available.
Sorry this item is out of production
Combined regulator rectifier to replace separate items on Bosch equipped models. See our wiring instructions page for help installing this reg/rec.
Supplied with long leads for battery and alternator connection. Female spades for alternator and charge sensing, ring connectors for battery. NB this reg/rec should not be used with a lithium-ion battery
This part is due back in stock soon, call 01484 841395 to reserve yours
£140.00
INC VAT
£116.67 EX VAT
Complete shallow bowl 193mm satin black LED headlight unit. Bright, neutral beam pattern will pass an MOT and illuminates the road much better than a halogen unit. Classic looks suit models from the Le Mans 1 to the V9
Fits Le Mans 1 headlamp cowling FAA99575. Also perfect for custom builds, cafe racers and specials.
NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems. Neutral beam pattern and not E Marked.
Tried and tested on our bikes at Gutsibits
This part is available by special order, request a quote
£130.00
INC VAT
£108.33 EX VAT
Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.
This part is due back in stock soon, call 01484 841395 to reserve yours
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£125.00
INC VAT
£104.17 EX VAT
Brand new right hand original "Lego" type switchgear and twistgrip with switches for starter and run/kill.
Previously unavailable new and ideal for your restoration project.
Comes with attached 4 pin molex connector, molex pins and rubber boot, ready to be plugged into your standard loom.
Twistgrip for standard dual throttle cables.
See ELA17061 and ELA14055 for left hand switches.
Sorry, this part is no longer available.
Sorry this item is out of production
Rectifier / diode board for Bosch charging systems. High quaility replacement part sourced from Germany
See our Bosch fault finder page for help diagnosing problems on your Bosch charging system.
1 in stock
17704300-z 17704300 GU17704300 17 70 43 00
1770 4300 1770.4300 17.70.43.00
£95.00
INC VAT
£79.17 EX VAT
Complete shallow bowl 190mm gloss black headlight unit.
Fits Le Mans 1 headlamp cowling FAA99575. Supplied complete with bulb and three short wires (without connectors). NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems. Neutral beam pattern and not E Marked
This part is due back in stock soon, call 01484 841395 to reserve yours
£95.00
INC VAT
£79.17 EX VAT
Replacement alternator rotor for Bosch systems
See ELA17400 for matching stator and TOA14008 for rotor removal tool. We recommend changing the timing cover oil seal ENA90428 when changing the rotor. Also fits Yamaha RD350, FZR1000 and 1000 Fazer. Note that new rotors may need energizing, see our faultfinder for details.
This part is due back in stock soon, call 01484 841395 to reserve yours
Also fits Benelli 900 Sei (Series 2)
£93.00
INC VAT
£77.50 EX VAT