Shop headings: New Spares | Used Spares | Accessories | Brands
Replacement regulator rectifier for models fitted with the Ducati charging system. This is a quality unit and is supplied with fitting instructions
Connections: 2 x yellow male bullet, 1 x white female bullet, 1 x black ring, 1 x red ring. You will need to reuse your existing block connectors to connect this to your loom. See this wiring diagram for wiring connections
This part is due back in stock soon, call 01484 841395 to reserve yours
37703805-z 37703805 GU37703805 37 70 38 05
3770 3805 3770.3805 37.70.38.05
£138.00
INC VAT
£115.00 EX VAT
Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.
1 in stock
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£125.00
INC VAT
£104.17 EX VAT
Timing sensor for ignition and tacho
3 pin block connector. Used on models with the smaller 15M ECU
Order now and we will post your order within 7 days.
01721600 GU01721600 01 72 16 00
0172 1600 0172.1600 01.72.16.00
£115.00
INC VAT
£95.83 EX VAT
Lambda sensor. Wiring harness may be shorter that your existing connector on some modeels, and will therefore need extending.
This part is available by special order, request a quote
32727010 GU32727010 32 72 70 10
3272 7010 3272.7010 32.72.70.10
£115.00
INC VAT
£95.83 EX VAT
TPS for throttle body
On Cali 1100 check which TPS you have (varies according to ECU)
2 in stock
01530500 GU01530500 01 53 05 00
0153 0500 0153.0500 01.53.05.00
£105.00
INC VAT
£87.50 EX VAT
Left hand Domino type switchgear with high and low beam, pass, indicator and horn switches. Same style switch as ELA01738
On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. An indication of wire colours is supplied with this switchgear. Supplied with 9 pin block connector. NB does not have lights off - park - on function, you need this to be on your RH switch (e.g. ELA01729 ) or run lights always on
This part is available by special order, request a quote
£88.00
INC VAT
£73.33 EX VAT
Domino left hand switchgear with lights on - park - off, high and low beam, pass, indicator and horn switches. Same style switch as ELA01738.
Already wired in to 9 pin block connector (you may need to alter the wiring on your bike to correspond to this block connector). Originally fitted as standard to early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear. See Greg Bender's website for a custom sub-loom that enables easy fitting of this part to models previously fitted with LEGO style swithgear. Small block models will require an adapter to retain all the switch functions.
This part is due back in stock soon, call 01484 841395 to reserve yours
01738030 GU01738030 01 73 80 30
0173 8030 0173.8030 01.73.80.30
£88.00
INC VAT
£73.33 EX VAT
Marelli air temperature sensor
Supplied with screws. Two required per engine
Order now and we will post your order within 7 days.
30729330 GU30729330 30 72 93 30
3072 9330 3072.9330 30.72.93.30
£85.00
INC VAT
£70.83 EX VAT
Neutral switch
Also known as Guzzi ref. 19207200
This part is due back in stock soon, call 01484 841395 to reserve yours
19207220 GU19207220 19 20 72 20
1920 7220 1920.7220 19.20.72.20
£85.00
INC VAT
£70.83 EX VAT
Ignition pickup and tacho sensor
Connector plug has two male spades. Also known as phase sensor. Used on models with the large Marelli P8 ECU. No longer available from Guzzi. Note 90° angle where cable exits sensor. See ENA90141 for O ring used to fit this part
1 in stock
29721660 GU29721660 29 72 16 60
2972 1660 2972.1660 29.72.16.60
£84.50
INC VAT
£70.42 EX VAT