Shop headings: New Spares | Used Spares | Accessories | Brands
Standard size exhaust downpipe set with balance pipe finished in black
Match these header pipes with Lafranconi silencers EXA14998 for a full Le Mans 1 or 2 exhaust system.
The black finish on these is very basic so you may wish to get them recoated before use.
Sorry, this part is no longer available.
14120751-z 14120751 GU14120751 14 12 07 51
1412 0751 1412.0751 14.12.07.51
Sorry this item is out of production
Dimensions:
650mm x 290mm x 125mm
Stylish two person black saddle with white Moto Guzzi lettering. These seats have been removed from brand new V7s and are in excellent condition.
Could also suit your small block cafe racer or Tonti framed special- you will need to devise suitable method of securing saddle to your frame
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
Sorry, this part is no longer available.
978931 MG978931
£99.80
INC VAT
£83.17 EX VAT
Dimensions:
Box measures 110mm x 70mm x 85mm, crankcase spigots measure 8mm OD and 17mm OD respectively
Crankcase breather tank / box in black. Also suitable for round barrelled specials where the standard airbox has been replaced with aftermarket filters
3 pipe connections on underside (large, medium and small diameters), plus connection for rocker cover breather pipes. Connects to ENA14157, ENA17700 and ENA95136
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
14155700-z 14155700 GU14155700 14 15 57 00
1415 5700 1415.5700 14.15.57.00
£18.00
INC VAT
£15.00 EX VAT
Dimensions:
Box measures 110mm x 70mm x 85mm, crankcase spigots measure 8mm OD and 17mm OD respectively
Crankcase breather tank / box in black. Also suitable for round barrelled specials where the standard airbox has been replaced with aftermarket filters
3 pipe connections on underside (large, medium and small diameters), plus connection for rocker cover breather pipes. Connects to ENA14157, ENA17700 and ENA95136
This part is due back in stock soon, call 01484 841395 to reserve yours
14155700-z 14155700 GU14155700 14 15 57 00
1415 5700 1415.5700 14.15.57.00
£61.75
INC VAT
£51.46 EX VAT
Crankcase breather tank / box in black
3 pipe connections, with integral non-return valve. Use breather pipe set ENA14157 with this box
This part is due back in stock soon, call 01484 841395 to reserve yours
12155701 GU12155701 12 15 57 01
1215 5701 1215.5701 12.15.57.01
£34.70
INC VAT
£28.92 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Dimensions:
6mm thick aluminium, 70mm centres on M8 mounting holes, for 48mm deep instruments with 60mm stud centres
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes
2 in stock
£205.00
INC VAT
£170.83 EX VAT
Dimensions:
For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp
Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube
These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.
This part is available by special order, request a quote
£240.00
INC VAT
£200.00 EX VAT
Dimensions:
For 38mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp
Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube
These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.
This part is available by special order, request a quote
£240.00
INC VAT
£200.00 EX VAT
Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube
38mm rise
Sorry, this part is no longer available.
Sorry this item is out of production