Shop headings: New Spares | Used Spares | Accessories | Brands
Screen kit with clear blade and black brackets.
This part is available by special order, request a quote
2S001569
£216.00
INC VAT
£180.00 EX VAT
Pair of high quality large bore exhaust header pipes for standard Le Mans exhaust systems. Finished in polished stainless and made in Mandello these downpipes have been developed specifically for the Le Mans and are an excellent choice for bikes that will be ridden. Separate exhaust collets not required with these downpipes.
Hand made to order in Italy
Note that there is no crosspipe joining these downpipes as they are designed to fit with EXA50010 on Le Mans 1 and 2 models, polished and satin finish downpipes with crosspipe are available by special order
This part is available by special order, request a quote
£215.00
INC VAT
£179.17 EX VAT
Dimensions:
6mm thick aluminium, 70mm centres on M8 mounting holes, for 48mm deep instruments with 60mm stud centres
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes
2 in stock
£205.00
INC VAT
£170.83 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Classic Le Mans 1 fairing cowling kit consisting of tinted screen with edging, black screen fasteners, quality replica cowling (pre drilled and manufactured exclusively for Gutsibits) in raw finish, side and lower fairing brackets.
We can also supply a headlamp ( LIA37593 or LIA37595 ), headlamp brackets, indicators and stems and most other parts you might need to turn your bike into Le Mans 1 lookalike, call or email for details.
To mount this fairing you can use 5 x FRA06016 + 5 x FRA29577 + 2 x FRA93060 - these are not included with the kit
This part is due back in stock soon, call 01484 841395 to reserve yours
£198.00
INC VAT
£165.00 EX VAT
Smarten up the rear of your V7 with this fenda eliminator kit with includes an LED tail light.
This tail tidy is part of the exciting range of MAS parts to make your V7 stand out from the crowd. Please note that these items are custom made in Italy and normally available to special order with a delivery time of approximately 6 weeks
1 in stock
£185.20
INC VAT
£154.33 EX VAT
Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube
38mm rise
This part is available by special order, request a quote
£170.00
INC VAT
£141.67 EX VAT
Polished aluminium front mudguard
Part of the exciting range of MAS aluminium parts to make your V7 stand out from the crowd. Please note that these items are custom made in Italy and normally available to special order with a delivery time of approximately 6 weeks. Does not fit V7 III
This part is available by special order, request a quote
£159.00
INC VAT
£132.50 EX VAT
Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube
38mm rise
Sorry, this part is no longer available.
Sorry this item is out of production
Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube
38mm rise
Sorry, this part is no longer available.
Sorry this item is out of production