Shop headings: New Spares | Used Spares | Accessories | Brands
Pair of high quality large bore exhaust header pipes for standard Le Mans exhaust systems. Finished in polished stainless and made in Mandello these downpipes have been developed specifically for the Le Mans and are an excellent choice for bikes that will be ridden. Separate exhaust collets not required with these downpipes.
Hand made to order in Italy
Note that there is no crosspipe joining these downpipes as they are designed to fit with EXA50010 on Le Mans 1 and 2 models, polished and satin finish downpipes with crosspipe are available by special order
This part is available by special order, request a quote
£215.00
INC VAT
£179.17 EX VAT
Pair of high quality large bore exhaust header pipes for standard Le Mans exhaust systems. Finished in black and made in Mandello these downpipes have been developed specifically for the Le Mans 1 and 2 and are an excellent choice for bikes that will be ridden
Note that there is no crosspipe joining these downpipes as they are designed to be used with EXA50009. Unfortunately it is not possible to manufacture black painted downpipes with a crossover in front of the alternator due to the production process.
This part is available by special order, request a quote
£250.00
INC VAT
£208.33 EX VAT
Standard size exhaust downpipe set with balance pipe finished in black
Match these header pipes with Lafranconi silencers EXA14998 for a full Le Mans 1 or 2 exhaust system.
The black finish on these is very basic so you may wish to get them recoated before use.
Sorry, this part is no longer available.
14120751-z 14120751 GU14120751 14 12 07 51
1412 0751 1412.0751 14.12.07.51
Sorry this item is out of production
Dimensions:
Box measures 110mm x 70mm x 85mm, crankcase spigots measure 8mm OD and 17mm OD respectively
Crankcase breather tank / box in black. Also suitable for round barrelled specials where the standard airbox has been replaced with aftermarket filters
3 pipe connections on underside (large, medium and small diameters), plus connection for rocker cover breather pipes. Connects to ENA14157, ENA17700 and ENA95136
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
14155700-z 14155700 GU14155700 14 15 57 00
1415 5700 1415.5700 14.15.57.00
£18.00
INC VAT
£15.00 EX VAT
Dimensions:
Box measures 110mm x 70mm x 85mm, crankcase spigots measure 8mm OD and 17mm OD respectively
Crankcase breather tank / box in black. Also suitable for round barrelled specials where the standard airbox has been replaced with aftermarket filters
3 pipe connections on underside (large, medium and small diameters), plus connection for rocker cover breather pipes. Connects to ENA14157, ENA17700 and ENA95136
This part is due back in stock soon, call 01484 841395 to reserve yours
14155700-z 14155700 GU14155700 14 15 57 00
1415 5700 1415.5700 14.15.57.00
£61.75
INC VAT
£51.46 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Dimensions:
6mm thick aluminium, 70mm centres on M8 mounting holes, for 48mm deep instruments with 60mm stud centres
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes
2 in stock
£205.00
INC VAT
£170.83 EX VAT
Dimensions:
For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp
Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube
These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.
This part is available by special order, request a quote
£240.00
INC VAT
£200.00 EX VAT
Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube
38mm rise
Sorry, this part is no longer available.
Sorry this item is out of production
Pair of chrome reverse cone mega type silencers supplied with shims to allow fitment to a variety of models. Adjustable mounting bracket and clamp included.
You may need to modify brackets or fabricate your own depending upon which model you have
This part is available by special order, request a quote
£148.90
INC VAT
£124.08 EX VAT