Shop headings: New Spares | Used Spares | Accessories | Brands
S&B air filter. Large circular K & N type air filter with chromed back, includes clip. Designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable. Best run dry for road. Fits square bodied VHB 30 carbs.
Either ENA14700 or ENA14157 can be used as a breather box to replace the unit in the airbox. See SIA00095 if you require a longer narrower filter with the same ID. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter
More than 5 in stock
£19.80
INC VAT
£16.50 EX VAT
Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models
Make your Guzzi stand out from the crowd!
This part is available by special order, request a quote
10430830 GU10430830 10 43 08 30
1043 0830 1043.0830 10.43.08.30
£32.50
INC VAT
£27.08 EX VAT
Gorgeous polished aluminium reservoir cap for PS15 Brembo master cylinder fitted to rear linked system on many models, will fit front master cylinder on models where a PS15 handlebar master cylinder is fitted. Seal is not included with this cap - you should re-use your original cap seal
Make your Guzzi stand out from the crowd!
This part is available by special order, request a quote
14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00
Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR
£32.50
INC VAT
£27.08 EX VAT
Classically styled humped race seat unit with built in number plate hanger and recess for tail light ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications
Mounting brackets and seat cushion not included
This part is available by special order, request a quote
£104.80
INC VAT
£87.33 EX VAT
Classically styled humped race seat unit ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications
Mounting brackets and seat cushion not included
This part is due back in stock soon, call 01484 841395 to reserve yours
£104.80
INC VAT
£87.33 EX VAT
Pair of chrome reverse cone mega type silencers supplied with shims to allow fitment to a variety of models. Adjustable mounting bracket and clamp included.
You may need to modify brackets or fabricate your own depending upon which model you have
This part is available by special order, request a quote
£148.90
INC VAT
£124.08 EX VAT
Dimensions:
For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp
Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube
These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.
This part is available by special order, request a quote
£240.00
INC VAT
£200.00 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Dimensions:
Box measures 110mm x 70mm x 85mm, crankcase spigots measure 8mm OD and 17mm OD respectively
Crankcase breather tank / box in black. Also suitable for round barrelled specials where the standard airbox has been replaced with aftermarket filters
3 pipe connections on underside (large, medium and small diameters), plus connection for rocker cover breather pipes. Connects to ENA14157, ENA17700 and ENA95136
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
14155700-z 14155700 GU14155700 14 15 57 00
1415 5700 1415.5700 14.15.57.00
£18.00
INC VAT
£15.00 EX VAT
Dimensions:
Box measures 110mm x 70mm x 85mm, crankcase spigots measure 8mm OD and 17mm OD respectively
Crankcase breather tank / box in black. Also suitable for round barrelled specials where the standard airbox has been replaced with aftermarket filters
3 pipe connections on underside (large, medium and small diameters), plus connection for rocker cover breather pipes. Connects to ENA14157, ENA17700 and ENA95136
This part is due back in stock soon, call 01484 841395 to reserve yours
14155700-z 14155700 GU14155700 14 15 57 00
1415 5700 1415.5700 14.15.57.00
£61.75
INC VAT
£51.46 EX VAT