Shop headings: New Spares | Used Spares | Accessories | Brands
Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.
This clutch upgrade has the following advanges over the old two plate clutch:
This part is due back in stock soon, call 01484 841395 to reserve yours
£520.00
INC VAT
£433.33 EX VAT
Complete 950cc piston and Nikasil coated barrel kit including gudgeon pin, piston rings and circlips. Piston is low compression. This is a 950cc upgrade for 850cc models
Components for one cylinder. The barrel is designed to fit the standard crankcase aperture on 850cc bikes so it is not necessary to modify the crankcase. For the 850 GT it may be necessary to enlarge the pushrod tunnel opening in the head gasket to suit the 850 GT valve gear placement
This part is available by special order, request a quote
18060102-z 18060102 GU18060102 18 06 01 02
1806 0102 1806.0102 18.06.01.02
£311.00
INC VAT
£259.17 EX VAT
Set of matt finish aluminium loop frame rocker covers. This rocker cover set is ideal for finishing off your restoration project, these can be fited to square barrel models if fitted with adapter kit ACA30310
This part is available by special order, request a quote
12023501 GU12023501 12 02 35 01
1202 3501 1202.3501 12.02.35.01
£250.00
INC VAT
£208.33 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Clamp on retro style bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors. Classic oval shape can be flipped for fitting on either side and above or below the handlebars.
The Reverse Retro mirror is made from billet aluminum. Compact, classy and unmistakable design. Simple lines make it a sought-after Classic suitable for a range of styles. The adjustment system and anti-dazzle glass guarantee optimal versatility and comfort.
Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted
Perfect for that classic cafe racer look
This part is available by special order, request a quote
£115.00
INC VAT
£95.83 EX VAT
Classically styled humped race seat unit with built in number plate hanger and recess for tail light ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications
Mounting brackets and seat cushion not included
This part is available by special order, request a quote
£104.80
INC VAT
£87.33 EX VAT
Classically styled humped race seat unit ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications
Mounting brackets and seat cushion not included
This part is due back in stock soon, call 01484 841395 to reserve yours
£104.80
INC VAT
£87.33 EX VAT
Stylish fibreglass Imola fairing ideal for your home built Guzzi cafe racer. Supplied unpainted and undrilled. Brackets and screen not included.
Designed to work with 750SS / 900SS screen. See CFA00076 for a screen and LIA97595 for a compatible LED headlight
This part is available by special order, request a quote
079703958
Also fits Ducati 750/900 SS & SSD
£100.40
INC VAT
£83.67 EX VAT
Clamp on bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors
Ideal for models like the V7 Racer where bar ends are fitted. This elegant LSL Clubman mirror fits all 22mm and 1" bars. Fits left or right. Blue tinted glass to reduce glare
Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted
Perfect for that classic cafe racer look
2 in stock
£64.00
INC VAT
£53.33 EX VAT
Dimensions:
35mm internal diameter x 70mm tall collar, approx. 105mm reach from stanchion to headlight bolt
Pair of Tommaselli chromed headlight brackets with anti vibration rubber collars and silver finish aluminium brackets. To fit 35mm and 36mm diameter forks.
This part is due back in stock soon, call 01484 841395 to reserve yours
£57.00
INC VAT
£47.50 EX VAT