Shop headings: New Spares | Used Spares | Accessories | Brands
Pair of replacement anodised alloy pistons for Brembo F05 (P5) calipers. These also fit Grimeca calipers with 32mm pistons
Also used on some Laverdas. BRA19301 for alternative part in stainless steel
This part is due back in stock soon, call 01484 841395 to reserve yours
19652300 GU19652300 19 65 23 00
1965 2300 1965.2300 19.65.23.00
Also fits Benelli 250 TS, Ducati Pantah 500SL
£31.80
INC VAT
£26.50 EX VAT
Brakelight switch (microswitch) with 2 pin lead
Also see ELA30860
Availability varies on this part, check availability
27749815 GU27749815 27 74 98 15
2774 9815 2774.9815 27.74.98.15
£31.60
INC VAT
£26.33 EX VAT
Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers
For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers
More than 5 in stock
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£31.50
INC VAT
£26.25 EX VAT
Front right hand brake pipe linking right hand caliper to manifold on front yoke
Original type rubber brakeline with chunky galvanized ends
This part is available by special order, request a quote
63657121-z 63657121 GU63657121 63 65 71 21
6365 7121 6365.7121 63.65.71.21
£30.50
INC VAT
£25.42 EX VAT
Brembo pad pin kit for Brembo caliper fitted to rear, single pin. See BRA33799 for rear calipers with two pins
Brembo ref. 120511611
1 in stock
31659181 GU31659181 31 65 91 81
3165 9181 3165.9181 31.65.91.81
£29.90
INC VAT
£24.92 EX VAT
Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder
NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060
2 in stock
£29.50
INC VAT
£24.58 EX VAT
Brembo Pad Pin Kit for P9 Calipers.
Formerly known as Guzzi part 18659150. Brembo ref. 120274220
This part is due back in stock soon, call 01484 841395 to reserve yours
20274220 GU20274220 20 27 42 20
2027 4220 2027.4220 20.27.42.20
£29.45
INC VAT
£24.54 EX VAT
Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
See BRA10310 for less expensive replica kit
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£29.00
INC VAT
£24.17 EX VAT
Polished adjustable aluminium brake lever for PS 11, PS 13 and PS 16 master cylinders
Also known as Guzzi ref. 10270652. See HAA10850 for lever pivot pin and BRA01630 for span adjustable alternative lever
1 in stock
30605680-z 30605680 GU30605680 30 60 56 80
3060 5680 3060.5680 30.60.56.80
£29.00
INC VAT
£24.17 EX VAT
Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750
This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit
More than 5 in stock
17659352 GU17659352 17 65 93 52
1765 9352 1765.9352 17.65.93.52
Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1
£28.50
INC VAT
£23.75 EX VAT