Shop headings: New Spares | Used Spares | Accessories | Brands
Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons
A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752
5 in stock
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£35.00
INC VAT
£29.17 EX VAT
Circlip used for retaining brake disc on Tonti framed models, used for gearbox applications on later bikes
More than 5 in stock
90271022 GU90271022 90 27 10 22
9027 1022 9027.1022 90.27.10.22
£0.90
INC VAT
£0.75 EX VAT
Clevis pin used in brake and gear change linkages, wears over time so well worth replacing on high mileage bikes
Replaces Guzzi refs. 95780265, 95780267, 95770265-Z, 95780265-Z. See BRA95227 for retaining split pin
1 in stock
95770265 GU95770265 95 77 02 65
9577 0265 9577.0265 95.77.02.65
£11.76
INC VAT
£9.80 EX VAT
Black 45 degree rubber cap for brakeline banjo union with master cylinder
Also used for cable exit from clip ons fitted to Le Mans 1 and Le Mans 2. Front brake light switch cover for ELA14959
This part is due back in stock soon, call 01484 841395 to reserve yours
39663801 GU39663801 39 66 38 01
3966 3801 3966.3801 39.66.38.01
£4.20
INC VAT
£3.50 EX VAT
Stainless steel M10 double banjo bolt for aluminium coloured brake manifolds only, used with front yoke mounted splitter on some small twins
Supplied with 3 crush washers
This part is available by special order, request a quote
95990034 GU95990034 95 99 00 34
9599 0034 9599.0034 95.99.00.34
£7.20
INC VAT
£6.00 EX VAT
One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area.
See BRA99014 for high performance alternative
More than 5 in stock
£13.75
INC VAT
£11.46 EX VAT
500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.
See BRA99013 for high performance alternative.
If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£7.92
INC VAT
£6.60 EX VAT
Fixed rigid brake pipe linking front and rear of linked system, located under fuel tank
Original type rigid brake line
This part is due back in stock soon, call 01484 841395 to reserve yours
17658750
£36.00
INC VAT
£30.00 EX VAT
Silver finish foot brake pedal supplied without rubber
Rubber FRA14001 can be used with this lever
This part is available by special order, request a quote
32677011 GU32677011 32 67 70 11
3267 7011 3267.7011 32.67.70.11
£89.00
INC VAT
£74.17 EX VAT
Foot brake pedal supplied without rubber or peg
Rubber FRA81212 fits this lever
This part is available by special order, request a quote
887910 MG887910
£54.00
INC VAT
£45.00 EX VAT