Shop headings: New Spares | Used Spares | Accessories | Brands
This section contains everything brake related from pads to banjo bolts and discs
Drilled original type two part front brake disc, black centre
Always fit new brake pads when replacing a brake disc - see BRA54724 . TUV Approved. Needs 6 brake disc bolts BRA98460 Rotor is available as BRA14659
This part is available by special order, request a quote
14613350-z 14613350 GU14613350 14 61 33 50
1461 3350 1461.3350 14.61.33.50
£249.00
INC VAT
£207.50 EX VAT
Front Brembo type brake disc, 6 mounting holes. Not drilled. High quality Italian made part
Also known as Guzzi ref. 14613350. Minimum thickness for these cast brake discs is 5.8mm. Always fit new brake pads when replacing a brake disc - see BRA54724. These discs may have oily manufacturing residues on the surface, this should be cleaned off using a cleaning alcohol or brake cleaner before fitting. New pads and discs should be bedded in using normal bedding in procedures. Needs 6 brake disc bolts BRA99499
This part is due back in stock soon, call 01484 841395 to reserve yours
28613345 GU28613345 28 61 33 45
2861 3345 2861.3345 28.61.33.45
Also fits Benelli Sei
£225.00
INC VAT
£187.50 EX VAT
Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper
Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.
This part is due back in stock soon, call 01484 841395 to reserve yours
17652360 GU17652360 17 65 23 60
1765 2360 1765.2360 17.65.23.60
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear
Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806
This part is due back in stock soon, call 01484 841395 to reserve yours
18652201 GU18652201 18 65 22 01
1865 2201 1865.2201 18.65.22.01
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Rear dished drilled cast brake disc, black centre, 6 hole
Always fit new brake pads when replacing a brake disc - see BRA54724 . Also known as Guzzi ref. 14735750. Needs 6 brake disc bolts BRA98450. A quality part made in Italy
This part is due back in stock soon, call 01484 841395 to reserve yours
14635760 GU14635760 14 63 57 60
1463 5760 1463.5760 14.63.57.60
£210.00
INC VAT
£175.00 EX VAT
Brembo PS 16 rear master cylinder for models with a remote reservoir, suitable as a replacement for the standard PS15 master cylinder which has now been discontinued by Brembo. Supplied with operating lever. Mounting holes at 50mm centres
Brembo ref. 10.2934.02 See BRA19500 for the elbow that the fluid supply pipe fits onto. Also see BRC19001 for a reconditioned PS15 MC
This part is due back in stock soon, call 01484 841395 to reserve yours
19667000 GU19667000 19 66 70 00
1966 7000 1966.7000 19.66.70.00
£195.00
INC VAT
£162.50 EX VAT
Brembo PS 13 handlebar mounted front master cylinder. The PS13 has a small rectangular fluid reservoir
Replaces Guzzi refs 28660178 and 30660180. Supplied complete with black or polished lever. Uses switch ELA30860
1 in stock
28660278 GU28660278 28 66 02 78
2866 0278 2866.0278 28.66.02.78
£185.00
INC VAT
£154.17 EX VAT
Drilled front brake rotor. This replacement rotor is manufactured using a modern steel and will not rust like the original
Attaches via M6 threaded holes using SSA06016.
This part is available by special order, request a quote
14613350 GU14613350 14 61 33 50
1461 3350 1461.3350 14.61.33.50
£185.00
INC VAT
£154.17 EX VAT
Complete drilled fully floating stainless steel EBC Brake Disc for front right hand side
Also known as Guzzi ref 28613660, 30635860. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to front of Nevada, Lario, T5, SP II, Monza 2, V75 and V35 3. Always fit new brake pads when replacing a brake disc. Use disc bolt BRA30460
This part is available by special order, request a quote
28613670-z 28613670 GU28613670 28 61 36 70
2861 3670 2861.3670 28.61.36.70
£169.10
INC VAT
£140.92 EX VAT
Complete drilled fully floating stainless steel EBC Brake Disc. Used for rear and front left hand brake disc for Le Mans 1000, 1000S. Rear brake disc only on Cali 3, Cali 1100, Spada 3, Strada 1000
Also known as Guzzi ref 28613660, 30635860. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to front of Nevada, Lario, T5, SP II, Monza 2, V75 and V35 3. Always fit new brake pads when replacing a brake disc - BRA54724 . Use disc bolt BRA30460
This part is available by special order, request a quote
28613670-z 28613670 GU28613670 28 61 36 70
2861 3670 2861.3670 28.61.36.70
£169.10
INC VAT
£140.92 EX VAT