Shop headings: New Spares | Used Spares | Accessories | Brands
Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.
For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers
4 in stock
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£19.30
INC VAT
£16.08 EX VAT
Brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals and O ring to seal the two halves together
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
1 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£18.00
INC VAT
£15.00 EX VAT
M12 pivot bolt kit for brake and gear lever pivots on Tonti framed models. Kit consists of 1 M12 bolt (with hex head and slotted other end), wavy washer, flat washer and half nut
Beautifully made to enhance the appearance of your bike, also cheaper than OE non stainless parts. Guzzi parts refs: 30252360, 98073660, 95100409, 92701120, 17252350. Does not fit G5
5 in stock
98053660-z 98053660 GU98053660 98 05 36 60
9805 3660 9805.3660 98.05.36.60
£17.50
INC VAT
£14.58 EX VAT
Brembo M10 bleed nipple kit containing M10 bleed nipple and rubber cap. M10 bleed screw used only on rear of 2003 on models
Brembo no. 98.8249.20
This part is available by special order, request a quote
17659260 GU17659260 17 65 92 60
1765 9260 1765.9260 17.65.92.60
£16.60
INC VAT
£13.83 EX VAT
One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area.
See BRA99014 for high performance alternative
More than 5 in stock
£13.75
INC VAT
£11.46 EX VAT
Brembo caliper cover for models with P2 F08 (P8) single bleed nipple calipers
You may need to immerse the cover in warm water before fitting
2 in stock
17654760 GU17654760 17 65 47 60
1765 4760 1765.4760 17.65.47.60
£12.50
INC VAT
£10.42 EX VAT
99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir
Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
Kit consisting of black plastic cap and rubber cap seal for PS 12 round handlebar master cylinders and single horizontal outlet remote reservoirs (e.g. BRG19901 )
Also known as Guzzi ref. 17661052, 10271110. Brembo ref. 110430830. This is the smaller of the two round master cylinder caps used on V35, V50, V65 and 850/1000 models
This part is due back in stock soon, call 01484 841395 to reserve yours
10430830 GU10430830 10 43 08 30
1043 0830 1043.0830 10.43.08.30
Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei
£12.00
INC VAT
£10.00 EX VAT
Clevis pin used in brake and gear change linkages, wears over time so well worth replacing on high mileage bikes
Replaces Guzzi refs. 95780265, 95780267, 95770265-Z, 95780265-Z. See BRA95227 for retaining split pin
1 in stock
95770265 GU95770265 95 77 02 65
9577 0265 9577.0265 95.77.02.65
£11.76
INC VAT
£9.80 EX VAT
Brembo caliper cover for models with obsolete twin bleed calipers
P9 caliper cover includes cutout each side for bleed nipple. Also known as Guzzi ref. 14654700, 17654760. Please note you may need to trim away the four moulded lugs at the bottom of the cover otherwise these may clash with your pad pins
3 in stock
20325410 GU20325410 20 32 54 10
2032 5410 2032.5410 20.32.54.10
£11.00
INC VAT
£9.17 EX VAT