Page 9 of 9
Automatic Bleed Valve M8 Bleed Nipple BRA41654 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone Dimensions: M8 x 1 The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function on this auto bleed valve, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover. Fits front calipers only on models listed above. 2 in stock
£26.50 INC VAT £22.08 EX VAT
Automatic Bleed Valve M6 Bleed Nipple BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL Dimensions: M6 x 16mm The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed. - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover More than 5 in stock
£26.50 INC VAT £22.08 EX VAT
Automatic Bleed Valve M10 Single Banjo Bolt BRA41653 Universal Part Dimensions: M10 bolt with M6 bleed nipple The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:
- Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover 3 in stock
£33.00 INC VAT £27.50 EX VAT
Aluminium Master Cylinder Cap PS15 Brembo BRA14102 Fits Cali 1100, Cali EV, 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada 750, 850T, V7 Sport, 750S, S3 Gorgeous polished aluminium reservoir cap for PS15 Brembo master cylinder fitted to rear linked system on many models, will fit front master cylinder on models where a PS15 handlebar master cylinder is fitted. Seal is not included with this cap - you should re-use your original cap seal Make your Guzzi stand out from the crowd! This part is available by special order, request a quote 14661100 GU14661100 14 66 11 00 1466 1100 1466.1100 14.66.11.00 Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR £32.50 INC VAT £27.08 EX VAT Aluminium Master Cylinder Cap PS12 Brembo BRA14103 Fits S3, Convert, G5, Cali 2, Le Mans 1, Le Mans 2, Le Mans 3, T3, T4, V35 II, V50 3, V65 ALL, V75 (4 Valves Per Cylinder), 750 SP, 750 Targa, Strada 750, NTX 350, V35 II, V35 Florida, Cali EV, Cali Jackal, Nevada (1991 - 2003), Cali 1100 (Frame Nos KC12446 - KD12178), Cali Stone, 1200 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Norge ALL, Quota 1100, Stelvio, Bellagio Dimensions: 53mm OD Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models Make your Guzzi stand out from the crowd! This part is available by special order, request a quote 10430830 GU10430830 10 43 08 30 1043 0830 1043.0830 10.43.08.30 £32.50 INC VAT £27.08 EX VAT Page 9 of 9
|