Brembo pad pin kit for Brembo P4 30/34F calipers fitted to front forks, two pins

Brembo ref. 120394230

 1 in stock

 01659130 GU01659130 01 65 91 30
 0165 9130 0165.9130 01.65.91.30

Kit consisting of black plastic cap and rubber cap seal for PS 12 round handlebar master cylinders and single horizontal outlet remote reservoirs (e.g. BRG19901 )

Also known as Guzzi ref. 17661052, 10271110. Brembo ref. 110430830. This is the smaller of the two round master cylinder caps used on V35, V50, V65 and 850/1000 models

 1 in stock

 10430830 GU10430830 10 43 08 30
 1043 0830 1043.0830 10.43.08.30

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei

O ring seal OR112 for rear master cylinder rod

 1 in stock

AP8120178

Polished replica adjustable aluminium brake lever for PS 16 and PS 22 handlebar master cylinders. Can also be fitted as an adjustable update to Breva 750, Nevada 750 (2004 on) , V7 Classic , V7 Cafe etc... Note that this lever blade is approximately 20mm shorter than the OE lever.

Also known as Guzzi ref. 981050 and 854603. BRA03645 can be used as a non adjustable substitute

 1 in stock

AP8133510

Also fits Aprilia Caponord, Aprilia Pegaso 650 (CHASSIS NUMBER PREFIX: ZD4VD0,ZD4VDA,ZD4VDB,ZD4VDD,ZD4VDE 2005-2009), Aprilia Futura 1000 (2001-2003)

Brakelight switch

Stop light switch also known as Guzzi ref. AP8224192
See FRA98412 for mounting screw

 1 in stock

03749845-z 03749845 GU03749845 03 74 98 45
 0374 9845 0374.9845 03.74.98.45

Pad pin kit for rear brake caliper. Consists of pad pin plus split pin

Also known as Guzzi ref. 978606

 1 in stock

 05659130 GU05659130 05 65 91 30
 0565 9130 0565.9130 05.65.91.30

Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder

Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'

 1 in stock

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   1 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers

Supplied with 4 crush washers. Also known as Guzzi ref. 95990033

 This part is due back in stock soon, call 01484 841395 to reserve yours

95990028-z 95990028 GU95990028 95 99 00 28
 9599 0028 9599.0028 95.99.00.28

Also fits Laverda Jota

Socket cap brake disc bolt for front discs

6 bolts required per disc. No longer available, superceded by FRA81285

 Sorry, this part is no longer available.

 05611430 GU05611430 05 61 14 30
 0561 1430 0561.1430 05.61.14.30