Shop headings: New Spares | Used Spares | Accessories | Brands
This section contains everything brake related from pads to banjo bolts and discs
One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area.
See BRA99014 for high performance alternative
More than 5 in stock
£13.75
INC VAT
£11.46 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats
Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.
Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap
More than 5 in stock
£7.80
INC VAT
£6.50 EX VAT
Copper crush washer for brakeline connections, fits standard banjo bolt
Two M10 washers required per banjo bolt. Interchangeable with SIA10900
More than 5 in stock
25656100 GU25656100 25 65 61 00
2565 6100 2565.6100 25.65.61.00
£0.70
INC VAT
£0.58 EX VAT
Hex head brake disc bolt for front discs
Also known as Guzzi ref. 03611445. 6 bolts required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing
More than 5 in stock
AP8152286
£2.40
INC VAT
£2.00 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
More than 5 in stock
£8.20
INC VAT
£6.83 EX VAT
Rubber bleed nipple cap with retaining ring
Suitable only for M8 and M10 bleed nipples
More than 5 in stock
£1.00
INC VAT
£0.83 EX VAT
Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems
These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt
More than 5 in stock
Also fits Benelli 250 TS
£21.00
INC VAT
£17.50 EX VAT
500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.
See BRA99013 for high performance alternative.
If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£7.92
INC VAT
£6.60 EX VAT
49cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir
Brake fluid, oil and fuel resistant. We recommend measuring your existing pipe first to check ensure this 49cm pipe will be long enough. This is not long enough for the rear brake master cylinder on V50 II and V35 I
More than 5 in stock
£8.80
INC VAT
£7.33 EX VAT
Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers
Supplied with 4 crush washers. Also known as Guzzi ref. 95990033
More than 5 in stock
95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28
Also fits Laverda Jota
£8.40
INC VAT
£7.00 EX VAT