Shop headings: New Spares | Used Spares | Accessories | Brands
Complete drilled fully floating stainless steel EBC Brake Disc. Used for rear and front left hand brake disc for Le Mans 1000, 1000S. Rear brake disc only on Cali 3, Cali 1100, Spada 3, Strada 1000
Also known as Guzzi ref 28613660, 30635860. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to front of Nevada, Lario, T5, SP II, Monza 2, V75 and V35 3. Always fit new brake pads when replacing a brake disc - BRA54724 . Use disc bolt BRA30460
This part is available by special order, request a quote
28613670-z 28613670 GU28613670 28 61 36 70
2861 3670 2861.3670 28.61.36.70
£169.10
INC VAT
£140.92 EX VAT
5 hole disc carrier finished in black
We recommend you check your bobbins, spring washers and circlips are OK as these may also require replacement. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to Lario, T5, SP II, Monza 2, V75 and V35 3
This part is available by special order, request a quote
28613770 GU28613770 28 61 37 70
2861 3770 2861.3770 28.61.37.70
£33.10
INC VAT
£27.58 EX VAT
Zinc finish brake disc bolt, pre-treated with thread locking compound.
More than 5 in stock
98230825-z 98230825 GU98230825 98 23 08 25
9823 0825 9823.0825 98.23.08.25
£2.76
INC VAT
£2.30 EX VAT
Complete Brembo P32 rear brake caliper
Also known as Guzzi ref. 20516171, 20516151. This replaces the original but discontinued P2 F05 caliper and is not identical. Supplied with brake pads
This part is available by special order, request a quote
23653011 GU23653011 23 65 30 11
2365 3011 2365.3011 23.65.30.11
£156.00
INC VAT
£130.00 EX VAT
Pair of replacement anodised alloy pistons for Brembo F05 (P5) calipers. These also fit Grimeca calipers with 32mm pistons
Also used on some Laverdas. BRA19301 for alternative part in stainless steel
This part is due back in stock soon, call 01484 841395 to reserve yours
19652300 GU19652300 19 65 23 00
1965 2300 1965.2300 19.65.23.00
Also fits Benelli 250 TS, Ducati Pantah 500SL
£31.80
INC VAT
£26.50 EX VAT
Rebuild kit for Grimeca F05 (P5) type calipers with 32mm pistons
This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).
Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model.
3 in stock
Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4
£24.00
INC VAT
£20.00 EX VAT
Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease
This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).
Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.
This part is due back in stock soon, call 01484 841395 to reserve yours
39659000 GU39659000 39 65 90 00
3965 9000 3965.9000 39.65.90.00
Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4
£26.00
INC VAT
£21.67 EX VAT
Brembo caliper cover for models with F05 / P5 calipers
Also known as Guzzi ref. 20268810, 08203968.
1 in stock
39654700 GU39654700 39 65 47 00
3965 4700 3965.4700 39.65.47.00
Also fits Benelli 250 TS
£9.50
INC VAT
£7.92 EX VAT
Brembo rubber bleed nipple cap without retaining ring
More than 5 in stock
£1.00
INC VAT
£0.83 EX VAT
M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
Availability varies on this part, check availability
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£7.00
INC VAT
£5.83 EX VAT