The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares V65 Lario 750 Targa Strada 750 750T Brakes

Sort by Title

Sort by Price

Page 3 of 8

1 2 3 4 5 6 7 8

Automatic Bleed Valve M6 Bleed Nipple

BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
M6 x 16mm

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover
4 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper Overhaul Kit Brembo F05

BRA19722 Fits V35 ALL, V50 ALL, V65 ALL, V75, Nevada 750 (1991-1995), 750T, Targa 750

Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease

This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).

Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.

part in stock 3 in stock

39659000 GU39659000 39 65 90 00
3965 9000 3965.9000 39.65.90.00

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4

£26.00

INC VAT

£21.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Fine Thread

ELA07116 Fits Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, T5, 1000S, 1000 SP, SP II, Spada 3, G5, Convert, Cali 3, Cali 1100 (1994-1997), Cali EV, Spada ALL, Mille GT, Nevada 350, Nevada 750 (1991-2003), V65 Florida, 750SP, Strada 750, 750T, 750 Targa

Dimensions:
M10 fine thread

Fine thread screw in brakelight switch for linked system proportioning valve or splitter. See ELA12735 for rubber cap

Stop light switch also known as Guzzi ref. 63657000

part in stock 3 in stock

79654116 GU79654116 79 65 41 16
7965 4116 7965.4116 79.65.41.16

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 GT/Sport Köwe, Ducati 750 Paso (1984-1992), Ducati 750 Sport, Ducati 750/900 SS Köwe, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR-I, Ducati 900 SS (1990), Ducati 906 Paso (1988), Ducati 1000 MHR-2/S2

£21.40

INC VAT

£17.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Banjo Brake Light Switch Fine Thread

ELA14959 Fits 1100 Sport ALL, Centauro, Daytona (1991-1996), V11 Sport, V35 I, V35 II, V35 3, V35 Florida, V35C, V50 I, V50 II, V50C, V50 3, Monza, V65, V65 Florida, V65 GT, Lario, Quota ALL, Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, SP II, Spada 3, S3, T3, T4, T5, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Strada 1000, Nevada 750 (1991-2003)

Dimensions:
M10 x 1 x 17mm bolt, 18mm from end to underside of bolt head

Brakelight switch banjo bolt

See BRA01004 and BRA01014 for alternative universal stop light switch. Also known as Guzzi ref. 06261020, 000037891, 800037891, 079654114, 14657050

part in stock 3 in stock

14657959 GU14657959 14 65 79 59
1465 7959 1465.7959 14.65.79.59

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Front With Screws

ELA30860 Fits Cali 1100, Cali EV (1997-2001), Cali Jackal, Cali 3, V11 Sport, Nevada 750 (1991-2003), Nevada 350, Strada 1000, 750X, T5 Polizia, Daytona ALL, 1100 Sport IE, Le Mans 1000 (1988-1994), 750T

Dimensions:
20mm x 6mm x 9mm excluding spade connectors

Brakelight switch for handlebar mounted master cylinder

Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815. See ELA30861 for less expensive alternative part. Sometimes supplied with three terminals, in this instance disregard middle terminal

part in stock 3 in stock

30749860 GU30749860 30 74 98 60
3074 9860 3074.9860 30.74.98.60

£17.60

INC VAT

£14.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Rear Brake Caliper Overhaul Kit

BRA01723 Fits 750T, Nevada 750 (1993-1998), Nevada 350, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Centauro

Rebuild kit for Brembo P32 rear caliper. This is a comprehensive overhaul kit containing replacement dust seals, fluid seals, o ring, bleed nipple, dust cap, washers, brake grease and caliper bolts. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

part in stock 3 in stock

£45.00

INC VAT

£37.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper Overhaul Kit Grimeca F05 Type

BRA19731 Fits Strada 750 (1995), Nevada 750 (1995-2002), Nevada 350 (1995-1998)

Rebuild kit for Grimeca F05 (P5) type calipers with 32mm pistons

part in stock 3 in stock

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4

£24.00

INC VAT

£20.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Master Cylinder Angled Input Kit PS11, PS12 & PS15

BRA19500 Fits 1100 Sport ALL, Bellagio, Centauro, Le Mans 1000, Nevada ALL, V11 Sport, V65 ALL, V35 ALL, V50 ALL, Griso 1200, Daytona, SP II, 750 SP, Strada 750, 750 Targa, Le Mans 3, Spada 3, Strada 1000, 1000S, Mille GT

Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders

Also known as Brembo ref. 110312720

part in stock 2 in stock

19659500 GU19659500 19 65 95 00
1965 9500 1965.9500 19.65.95.00

£7.50

INC VAT

£6.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper Cover Brembo F05

BRA39700 Fits V35 ALL, V50 ALL, V65 ALL, V75 ALL

Brembo caliper cover for models with F05 / P5 calipers

Also known as Guzzi ref. 20268810, 08203968.

part in stock 2 in stock

39654700 GU39654700 39 65 47 00
3965 4700 3965.4700 39.65.47.00

Also fits Benelli 250 TS

£9.50

INC VAT

£7.92 EX VAT this is the price you will pay if you are ordering from outside the UK

M10 Banjo Bolt Stainless Steel Standard Thread

SSA97323 Fits V35 II, V50 3, V65, Cali 2

Dimensions:
M10 x 1.25

Stainless M10 x 1.25 steel banjo bolt, coarser thread (1.25) than most brake fittings. See BRA01001 for M10 x 1 banjo bolt for most other brake fittings and models

part in stock 2 in stock

£5.00

INC VAT

£4.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 3 of 8

1 2 3 4 5 6 7 8