Shop headings: New Spares | Used Spares | Accessories | Brands
Front right hand brake pipe linking right hand caliper to manifold on front yoke
Original type rubber brakeline with chunky galvanized ends
This part is available by special order, request a quote
63657121-z 63657121 GU63657121 63 65 71 21
6365 7121 6365.7121 63.65.71.21
£30.50
INC VAT
£25.42 EX VAT
Front left hand brake pipe linking left hand caliper to fixed brakeline running to rear of bike
Original type rubber brakeline with chunky galvanized ends
This part is available by special order, request a quote
14658850-z 14658850 GU14658850 14 65 88 50
1465 8850 1465.8850 14.65.88.50
£38.00
INC VAT
£31.67 EX VAT
Brake pipe used for supplying front left hand caliper, screws directly into caliper
Original type rubber brakeline with chunky galvanized ends
This part is available by special order, request a quote
17658860-z 17658860 GU17658860 17 65 88 60
1765 8860 1765.8860 17.65.88.60
£34.00
INC VAT
£28.33 EX VAT
Pair of EBC FA047 sintered brake pads for Brembo F05 (P5) and Grimeca calipers for extra braking power
Fits Nevada up until frame no. LK112433 Fits all calipers on pre 1993 models
3 in stock
27654610-z 27654610 GU27654610 27 65 46 10
2765 4610 2765.4610 27.65.46.10
Also fits Benelli 250 TS
£21.00
INC VAT
£17.50 EX VAT
Pair of EBC FA047 brake pads for Brembo F05 (P5) calipers and Grimeca front calipers
More than 5 in stock
27654610-z 27654610 GU27654610 27 65 46 10
2765 4610 2765.4610 27.65.46.10
Also fits Benelli 250 TS, Ducati Pantah 500SL, Magni Sfida
£17.00
INC VAT
£14.17 EX VAT
Pair of Brembo 07BB0106 carbon ceramic brake pads with wear indicators for Brembo F05 (P5) and Grimeca calipers
For rear only on Daytona, 1100 Sport, Centauro and V11 Sport. Fronts only on Strada 750 (Brembo equipped). Fits Nevada up until frame no. LK112433 Fits V50 ALL front and rear
This part is due back in stock soon, call 01484 841395 to reserve yours
27654610-z 27654610 GU27654610 27 65 46 10
2765 4610 2765.4610 27.65.46.10
Also fits Benelli 125 2C Fronts, Benelli 504 Sport Fronts (1976), Benelli 654 Fronts (1983), Bimota YB7 Rear (1989), Ducati 620 i.e Rear (2001), Ducati Monster 900 i.e. Rear (2002), Ducati Monster 1000 Rear (2003), Ducati Monster 1000 S Rear (2004), Ducati Monster S4 Rear (2001), Moto Morini Dart 350 Rear (1987), Moto Morini 350 Kanguro Rear (1987), Moto Morini Excaliber 350/501 Rear (1993-)
£17.50
INC VAT
£14.58 EX VAT
Brembo PS 12 front master cylinder overhaul kit / rebuild kit for models with a trapezoid handlebar mounted reservoir
This seal kit is also known as Brembo ref. 10.4090.20
Sorry, this part is no longer available.
28659300 GU28659300 28 65 93 00
2865 9300 2865.9300 28.65.93.00
Sorry this item is out of production
Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease
This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement
4 in stock
10273920 GU10273920 10 27 39 20
1027 3920 1027.3920 10.27.39.20
Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota
£26.00
INC VAT
£21.67 EX VAT
Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750
This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit
2 in stock
17659352 GU17659352 17 65 93 52
1765 9352 1765.9352 17.65.93.52
Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1
£28.50
INC VAT
£23.75 EX VAT
Brembo PS15 master cylinder cap
NB does not include rubber insert
Sorry, this part is no longer available.
14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00
Sorry this item is out of production