Shop headings: New Spares | Used Spares | Accessories | Brands
Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease
This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).
Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.
This part is due back in stock soon, call 01484 841395 to reserve yours
39659000 GU39659000 39 65 90 00
3965 9000 3965.9000 39.65.90.00
Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4
£26.00
INC VAT
£21.67 EX VAT
Brembo caliper cover for models with F05 / P5 calipers
Also known as Guzzi ref. 20268810, 08203968.
1 in stock
39654700 GU39654700 39 65 47 00
3965 4700 3965.4700 39.65.47.00
Also fits Benelli 250 TS
£9.50
INC VAT
£7.92 EX VAT
Brembo rubber bleed nipple cap without retaining ring
More than 5 in stock
£1.00
INC VAT
£0.83 EX VAT
M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
Availability varies on this part, check availability
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£7.00
INC VAT
£5.83 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT
A2 stainless steel hex head bolt, used for neutral switch on big twins and brake disc rotor on Le Mans 1, Le Mans 2 and Le Mans 3
9 bolts required per brake disc. Can also be used to secure carb banjo on many models.
More than 5 in stock
£0.70
INC VAT
£0.58 EX VAT
Bright zinc finish M8 hex head brake disc bolt
Rear disc bolt for Le Mans 1-3 models, front disc bolt on Le Mans 1 models. 6 bolts required per disc. Front disc bolt on small twins
More than 5 in stock
98052460 GU98052460 98 05 24 60
9805 2460 9805.2460 98.05.24.60
£1.30
INC VAT
£1.08 EX VAT
Brakelight switch banjo bolt
See BRA01004 and BRA01014 for alternative universal stop light switch. Also known as Guzzi ref. 06261020, 000037891, 800037891, 079654114, 14657050
2 in stock
14657959 GU14657959 14 65 79 59
1465 7959 1465.7959 14.65.79.59
£21.00
INC VAT
£17.50 EX VAT
Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems
These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt
More than 5 in stock
Also fits Benelli 250 TS
£21.00
INC VAT
£17.50 EX VAT
The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper
Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.
More than 5 in stock
£26.50
INC VAT
£22.08 EX VAT