Shop headings: New Spares | Used Spares | Accessories | Brands
Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
Availability varies on this part, check availability
£145.00
INC VAT
£120.83 EX VAT
Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT
Threaded linkage block used on brake or gear linkages (varies by model). Screws to M6 threaded rod
Wears over time, so we recommend replacing if your gear or brake linkage is sloppy
This part is available by special order, request a quote
18257551 GU18257551 18 25 75 51
1825 7551 1825.7551 18.25.75.51
£63.00
INC VAT
£52.50 EX VAT
Brakelight switch for handlebar master cylinder
As this is longer available you may wish to fit BRA01004 instead
Sorry, this part is no longer available.
28741100 GU28741100 28 74 11 00
2874 1100 2874.1100 28.74.11.00
Sorry this item is out of production
Brembo PS 12 front master cylinder overhaul kit / rebuild kit for models with a trapezoid handlebar mounted reservoir
This seal kit is also known as Brembo ref. 10.4090.20
Sorry, this part is no longer available.
28659300 GU28659300 28 65 93 00
2865 9300 2865.9300 28.65.93.00
Sorry this item is out of production
Rear brakeline from splitter or proportioning valve to rear caliper fixed pipe. Also used as lower front right hand pipe to caliper fixed pipe on T3
Original type rubber brakeline with chunky galvanized ends
This part is due back in stock soon, call 01484 841395 to reserve yours
17657550
£40.00
INC VAT
£33.33 EX VAT
Steel fixed rear brake pipe with threaded connectors at each end
Rigid brake pipe
This part is available by special order, request a quote
17658650 GU17658650 17 65 86 50
1765 8650 1765.8650 17.65.86.50
£39.90
INC VAT
£33.25 EX VAT
Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs
Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338
Sorry, this part is no longer available.
14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00
Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR
Sorry this item is out of production
Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons
A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752
More than 5 in stock
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£35.00
INC VAT
£29.17 EX VAT
5 hole disc carrier finished in black
We recommend you check your bobbins, spring washers and circlips are OK as these may also require replacement. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to Lario, T5, SP II, Monza 2, V75 and V35 3
This part is available by special order, request a quote
28613770 GU28613770 28 61 37 70
2861 3770 2861.3770 28.61.37.70
£33.10
INC VAT
£27.58 EX VAT