Shop headings: New Spares | Used Spares | Accessories | Brands
49cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir
Brake fluid, oil and fuel resistant. We recommend measuring your existing pipe first to check ensure this 49cm pipe will be long enough. This is not long enough for the rear brake master cylinder on V50 II and V35 I
More than 5 in stock
£8.80
INC VAT
£7.33 EX VAT
Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers
Supplied with 4 crush washers. Also known as Guzzi ref. 95990033
More than 5 in stock
95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28
Also fits Laverda Jota
£8.40
INC VAT
£7.00 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
More than 5 in stock
£8.20
INC VAT
£6.83 EX VAT
Brembo pad pin kit for rear Brembo P32 caliper
Also known as Guzzi ref. 20280030, mostly rear caliper applications. Brembo ref. 120280030
This part is due back in stock soon, call 01484 841395 to reserve yours
30659101 GU30659101 30 65 91 01
3065 9101 3065.9101 30.65.91.01
Also fits Bimota DB2
£8.00
INC VAT
£6.67 EX VAT
500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.
See BRA99013 for high performance alternative.
If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£7.92
INC VAT
£6.60 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats
Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.
Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap
More than 5 in stock
£7.80
INC VAT
£6.50 EX VAT
Pivot bolt and special nut for Brembo PS 13 and PS 16 master cylinders, also used for some hydraulic clutch lever pivot bolts
Not for early Cali 1100s fitted with solid brake lever pivot pins. Brembo ref. 110279850
This part is due back in stock soon, call 01484 841395 to reserve yours
10279850 GU10279850 10 27 98 50
1027 9850 1027.9850 10.27.98.50
£7.80
INC VAT
£6.50 EX VAT
Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders
Also known as Brembo ref. 110312720
2 in stock
19659500 GU19659500 19 65 95 00
1965 9500 1965.9500 19.65.95.00
£7.50
INC VAT
£6.25 EX VAT
A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models
Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230
4 in stock
01659230 GU01659230 01 65 92 30
0165 9230 0165.9230 01.65.92.30
£6.10
INC VAT
£5.08 EX VAT
70mm spring used as retaining spring for airbox and rear master cylinder return spring. Application varies by model
Two required for airbox. Some models use 50mm spring BRA17651 for master cylinder - we recommend measuring yours before ordering
2 in stock
17667650 GU17667650 17 66 76 50
1766 7650 1766.7650 17.66.76.50
£4.40
INC VAT
£3.67 EX VAT