Shop headings: New Spares | Used Spares | Accessories | Brands
Domino left hand switchgear with lights on - park - off, high and low beam, pass, indicator and horn switches. Same style switch as ELA01738.
Already wired in to 9 pin block connector (you may need to alter the wiring on your bike to correspond to this block connector). Originally fitted as standard to early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear. See Greg Bender's website for a custom sub-loom that enables easy fitting of this part to models previously fitted with LEGO style swithgear. Small block models will require an adapter to retain all the switch functions.
This part is due back in stock soon, call 01484 841395 to reserve yours
01738030 GU01738030 01 73 80 30
0173 8030 0173.8030 01.73.80.30
£88.00
INC VAT
£73.33 EX VAT
Magnetic oil drain plug for engine sump or filler plug for drive box and gearbox
Can also be fitted to V7 Sport, 750S, 850 GT and other early big twins which originally had a plain drain plug. May be supplied in either black or silver finish.. See SSA12600 and ACA12600 for stainless or aluminium versions of this part
This part is due back in stock soon, call 01484 841395 to reserve yours
12003702 GU12003702 12 00 37 02
1200 3702 1200.3702 12.00.37.02
£12.70
INC VAT
£10.58 EX VAT
Rear drive flange, locates in cush drive
Sorry, this part is no longer available.
19351401 GU19351401 19 35 14 01
1935 1401 1935.1401 19.35.14.01
Sorry this item is out of production
Splined driveshaft coupling for driveshaft
Supercedes Guzzi ref. 19327701
This part is available by special order, request a quote
31327783 GU31327783 31 32 77 83
3132 7783 3132.7783 31.32.77.83
£53.60
INC VAT
£44.67 EX VAT
Metal eagle badge used on yoke and solenoid cover
This part is due back in stock soon, call 01484 841395 to reserve yours
01517700 GU01517700 01 51 77 00
0151 7700 0151.7700 01.51.77.00
£15.00
INC VAT
£12.50 EX VAT
Dimensions:
55mm x 35mm x 4mm overall
Black rubber strap for retaining CDI/ECU
This only fits the smaller of the two ECUs fitted to the Cali 1100
This part is due back in stock soon, call 01484 841395 to reserve yours
29728960 GU29728960 29 72 89 60
2972 8960 2972.8960 29.72.89.60
£10.00
INC VAT
£8.33 EX VAT
Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with 12 volt 3 Ohm coils ELA14500 (big twins) and can be used to replace Digiplex on models with Ducati charging systems where the bike is converted to carburettors. This kit is just an ignition system, it will not control fuelling. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.
2 year warranty on Sachse ignition kits
Once fitted no further adjustment should be necessary. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. See this link for fitting instructions. Some bikes may need at least one additional spacer to allow enough clearance for alternator cover to fit once pickup is fitted. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA14500
This part is available by special order, request a quote
£395.00
INC VAT
£329.17 EX VAT
Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 3 Ohm 12 volt coils and can be used to replace points or Motoplat ignition on models with Saprisa charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.
2 year warranty on Sachse ignition kits
Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA31165
This part is available by special order, request a quote
£395.00
INC VAT
£329.17 EX VAT
Stainless steel drain plug for drive box and gearbox, includes recess for crush washer to locate in. Also used as level plug on big twins and front sump drain on small twins.
Also known as Guzzi ref. 95980212, 95980610. Use crush washer SIA10900 with this bolt
More than 5 in stock
95980214-z 95980214 GU95980214 95 98 02 14
9598 0214 9598.0214 95.98.02.14
£9.90
INC VAT
£8.25 EX VAT
One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area.
See BRA99014 for high performance alternative
More than 5 in stock
£13.75
INC VAT
£11.46 EX VAT