Replacement green LED in chrome bezel for Gutsibits clock surrounds ACA01001 and ACA01002

These 12v LEDs include a resistor, wires should be soldered to the mini spade connectors on the base of the LED

 5 in stock

Brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals and O ring to seal the two halves together

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

 5 in stock

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Quality workshop overall in Guzzi red with a large classic Moto Guzzi logo in white across the back of the shoulders. Highly durable and extremely practical, these overalls come complete with zipped chest pockets, phone and hip pockets for tools and essentials. Ideal as a gift

Features:

• Two zipped chest pockets.
• Tool pocket.
• Rule pocket.
• Two swing pockets with side access.
• Full back elastication and an action back.

Fabric:

• 65% polyester, 35% cotton. 245gsm.

 5 in stock

Ball bearing for 5 speed gearboxes

 5 in stock

92295702-z 92295702 GU92295702 92 29 57 02
 9229 5702 9229.5702 92.29.57.02

Single 100cm length of neoprene rubber pipe used for oil breather applications depending on model. Can be used as fuel pipe on carb bikes. Also see FUA00011 as alternative for this pipe

Use hose clip FUA00004

 5 in stock

Gasket for distributor to crankcase interface

 5 in stock

 12715901 GU12715901 12 71 59 01
 1271 5901 1271.5901 12.71.59.01

Round plastic bulb holder for instrument warning lights.

Requires minor modification to fit - you will need to either file down the locating lug in the instrument console or open up the locating groove on the bulb holder. For bulb LIA93140

 5 in stock

 14768655 GU14768655 14 76 86 55
 1476 8655 1476.8655 14.76.86.55

Premium softstyle grey T-shirt printed with classic Moto Guzzi logo in white on the chest.

Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!

Sizing:

• S fits 34 - 36" chest
• M fits 38 - 40" chest
• L fits 42 - 44" chest
• XL fits 46 - 48" chest
• XXL fits 50 - 52" chest

 5 in stock

Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons

A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752

 4 in stock

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Brembo caliper cover for models with obsolete twin bleed calipers

P9 caliper cover includes cutout each side for bleed nipple. Also known as Guzzi ref. 14654700, 17654760. Please note you may need to trim away the four moulded lugs at the bottom of the cover otherwise these may clash with your pad pins

 4 in stock

 20325410 GU20325410 20 32 54 10
 2032 5410 2032.5410 20.32.54.10