Shop headings: New Spares | Used Spares | Accessories | Brands
Reconditioned Valeo starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. Minor modification may be required on some pre 1990 models to make room for the solenoid. Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology. See , see this link for the modifications required to fit a Valeo starter to a 4 speed model.
This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address.
NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts.
Also known as Guzzi ref. 30730710
Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£155.00
INC VAT
£129.17 EX VAT
Complete replica sump for 850, 1000 and some 1100 models. Out of production for years, this is a good opportunity to replace a chipped or cosmetically damaged sump on your Guzzi
This part is available by special order, request a quote
14003500 GU14003500 14 00 35 00
1400 3500 1400.3500 14.00.35.00
£150.00
INC VAT
£125.00 EX VAT
Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube
38mm rise
Sorry, this part is no longer available.
Sorry this item is out of production
Splined drive plate incorporating cush drive (rubbers not included)
See WHA14336 for cush drive rubbers
This part is available by special order, request a quote
14335203 GU14335203 14 33 52 03
1433 5203 1433.5203 14.33.52.03
£149.00
INC VAT
£124.17 EX VAT
Pair of chrome reverse cone mega type silencers supplied with shims to allow fitment to a variety of models. Adjustable mounting bracket and clamp included.
You may need to modify brackets or fabricate your own depending upon which model you have
This part is available by special order, request a quote
£148.90
INC VAT
£124.08 EX VAT
Alternator stator for Bosch charging systems, this does not include the plate and brush holders
To fit this you will need to solder in the three wires from the windings. Replacement rotors and brushes also available. See ELA00503 for a complete higher output upgrade for your charging system
This part is available by special order, request a quote
17712400 GU17712400 17 71 24 00
1771 2400 1771.2400 17.71.24.00
£148.50
INC VAT
£123.75 EX VAT
Black steel centre stand without springs or brackets
Brackets, bushes and springs available separately.
Note that as with the original stand the lugs on this stand are only intended for pushing the stand to the ground and are not stong enough to lever your bike onto the stand. You should put your foot onto the foot of the stand to rock the bike back and up on to it
Sorry, this part is no longer available.
17430345-z 17430345 GU17430345 17 43 03 45
1743 0345 1743.0345 17.43.03.45
Sorry this item is out of production
Replacement clutch plate for single plate RAM clutches
Torque setting for fitting this is 25Nm with a thread locking compound
This part is available by special order, request a quote
£146.00
INC VAT
£121.67 EX VAT
Motoplat ignition unit for one cylinder (2 required per bike)
Also known as Guzzi ref. 23721493, 27721435, 23721491, 23721490, 27721435
This part is available by special order, request a quote
23721494 GU23721494 23 72 14 94
2372 1494 2372.1494 23.72.14.94
£145.00
INC VAT
£120.83 EX VAT
Rear main bearing flange
This part is available by special order, request a quote
12011400-z 12011400 GU12011400 12 01 14 00
1201 1400 1201.1400 12.01.14.00
£145.00
INC VAT
£120.83 EX VAT