Shop headings: New Spares | Used Spares | Accessories | Brands
O ring to replace standard pushrod seals on 5 speed big twins. Guzziology recommends fitting six of these instead of pushrod bush CLA14900. These can be fitted whils the pushrod is in the gearbox
6 required
More than 5 in stock
14085900-z 14085900 GU14085900 14 08 59 00
1408 5900 1408.5900 14.08.59.00
£0.60
INC VAT
£0.50 EX VAT
Stainless steel front brake disc bolt
More than 5 in stock
98052499 GU98052499 98 05 24 99
9805 2499 9805.2499 98.05.24.99
£1.80
INC VAT
£1.50 EX VAT
Mikalor stainless steel downpipe and balance box exhaust clamp
More than 5 in stock
14126900 GU14126900 14 12 69 00
1412 6900 1412.6900 14.12.69.00
£6.60
INC VAT
£5.50 EX VAT
Pinion oil seal for rear drive box on small twins and rear wheel bearing oil seal for 850T
More than 5 in stock
90403247 GU90403247 90 40 32 47
9040 3247 9040.3247 90.40.32.47
£10.50
INC VAT
£8.75 EX VAT
Rear wheel O ring
More than 5 in stock
90706490-z 90706490 GU90706490 90 70 64 90
9070 6490 9070.6490 90.70.64.90
£0.90
INC VAT
£0.75 EX VAT
Pack of 3 high quality A4 prints featuring artwork by Carl Hunton. Ideal for framing as a triptych these three prints feature a Guzzi Le Mans 1, Falcone, and V7 Scrambler. These prints are equally at home in your workshop or living room. Treat yourself to these inspiring and timeless images, or buy a friend the perfect Guzzi gift.
Printed on high quality glossy A4 paper, ready to frame
More than 5 in stock
£5.00
INC VAT
£4.17 EX VAT
Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
See BRA10310 for less expensive replica kit
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£29.00
INC VAT
£24.17 EX VAT
M6 wavy washer
Also known as Guzzi ref. 95129115
More than 5 in stock
03013800 GU03013800 03 01 38 00
0301 3800 0301.3800 03.01.38.00
£0.90
INC VAT
£0.75 EX VAT
Thick inlet manifold gasket
To suit Dellorto VHB 30 carb. 2 gaskets fitted per side on many models
More than 5 in stock
14115500-z 14115500 GU14115500 14 11 55 00
1411 5500 1411.5500 14.11.55.00
£2.20
INC VAT
£1.83 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT