Shop headings: New Spares | Used Spares | Accessories | Brands
Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear
Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806
This part is due back in stock soon, call 01484 841395 to reserve yours
18652201 GU18652201 18 65 22 01
1865 2201 1865.2201 18.65.22.01
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Pair of Italian made stainless steel downpipes in a polished finish.
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA16028
Exhaust collets not required
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
14120906+14120901
£215.00
INC VAT
£179.17 EX VAT
Pair of Italian made stainless steel downpipes in a satin finish
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA16129
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
14120906+14120901
£215.00
INC VAT
£179.17 EX VAT
Pair of Italian made stainless steel downpipes in a satin finish
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA03900
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
14120906+14120901
£215.00
INC VAT
£179.17 EX VAT
Pair of Italian made stainless steel downpipes in a polished finish
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA03900
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
£215.00
INC VAT
£179.17 EX VAT
Pair of YSS rear shock absorbers, milled aluminium body with black springs.
Continuous preload adjustment, fully rebuildable. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks
1 in stock
£210.00
INC VAT
£175.00 EX VAT
Pair of YSS rear shock absorbers, milled aluminium body with black springs. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks
Continuous preload adjustment, fully rebuildable. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks
Order now and we will post your order within 7 days.
£210.00
INC VAT
£175.00 EX VAT
Dimensions:
6mm thick aluminium, 70mm centres on M8 mounting holes, for 48mm deep instruments with 60mm stud centres
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes
2 in stock
£205.00
INC VAT
£170.83 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Rear dished cast brake disc, black centre, 6 hole
Also fits Le Mans 1, Le Mans 2, Le Mans 3. A quality Italian sourced spare
Always fit new brake pads when replacing a brake disc - see BRA54724. Needs 6 x BRA98445
This part is due back in stock soon, call 01484 841395 to reserve yours
18635760-z 18635760 GU18635760 18 63 57 60
1863 5760 1863.5760 18.63.57.60
£195.00
INC VAT
£162.50 EX VAT