Shop headings: New Spares | Used Spares | Accessories | Brands
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA18961
Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is due back in stock soon, call 01484 841395 to reserve yours
14526455-z 14526455 GU14526455 14 52 64 55
1452 6455 1452.6455 14.52.64.55
Also fits Benelli Sei 900
£245.00
INC VAT
£204.17 EX VAT
Factory upgraded oil pump with 16mm wide teeth as fitted to later big twins. Gives increased flow and can be retro fitted to earlier 850/1000 models which originally had 14mm teeth pumps
This part is available by special order, request a quote
30146400 GU30146400 30 14 64 00
3014 6400 3014.6400 30.14.64.00
£245.00
INC VAT
£204.17 EX VAT
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA14601
Stainless steel damper rod and alloy top nut, supplied with fork top O ring. These are made for the thinner wall stanchions used on the Le Mans 1. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is available by special order, request a quote
1452640*
£245.00
INC VAT
£204.17 EX VAT
Black 55 litre Junior top box / top case to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets
This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051
This part is available by special order, request a quote
£244.00
INC VAT
£203.33 EX VAT
Dimensions:
For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp
Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube
These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.
This part is available by special order, request a quote
£240.00
INC VAT
£200.00 EX VAT
Brand new genuine Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016
Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
This is a genuine Valeo starter made in the EU- please do not confuse with the cheap Chinese copies that sometimes appear on eBay.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Please note you can get a discount of £30 on this item if you part exchange your existing faulty starter motor. See ELA30837 for less expensive alternative part
This part is due back in stock soon, call 01484 841395 to reserve yours
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£231.00
INC VAT
£192.50 EX VAT
Complete Newtronic electronic ignition kit containing ignition pickup (distributor mounted) and ignition box. Retains original mechanical advance / retard mechanism.
Kit consists of sensor plate and pickups, magnet, ignition box, clip, screws and instructions.
Suitable for all models originally fitted with points which have a mechanical advance / retard . Can also be fitted to Strada 1000, Spada 3, Cali 3 etc... if the distributor is swapped for a points type part with advance / retard mechanism. Coils should have 4 Ohms resistance on the low tension circuit, OE coils will work OK but you may see improved results with high performance Dyna coil ELA14101
Developed from the original Piranha system, Newtronic ignitions are contact breaker replacement ignition systems covering a range of Japanese and European motorcycles from the late 1950's onwards. Using contactless, maintenance free, infra red triggering the Newtronic ignition has gained a reputation for ease of installation and effectiveness from satisfied motorcyclists around the World. The switching units include an integrated timing LED for each channel, making it quick and easy to accurately time each cylinder independently (an essential step in gaining the best performance from your engine.). The system typically consists of three main components:
1 in stock
£225.00
INC VAT
£187.50 EX VAT
Front Brembo type brake disc, 6 mounting holes. Not drilled. High quality Italian made part
Also known as Guzzi ref. 14613350. Minimum thickness for these cast brake discs is 5.8mm. Always fit new brake pads when replacing a brake disc - see BRA54724. These discs may have oily manufacturing residues on the surface, this should be cleaned off using a cleaning alcohol or brake cleaner before fitting. New pads and discs should be bedded in using normal bedding in procedures. Needs 6 brake disc bolts BRA99499
This part is due back in stock soon, call 01484 841395 to reserve yours
28613345 GU28613345 28 61 33 45
2861 3345 2861.3345 28.61.33.45
Also fits Benelli Sei
£225.00
INC VAT
£187.50 EX VAT
Brembo PS 16 handlebar mounted front master cylinder. This replaces the PS 15 handlebar mounted master cylinder which was unavailable for many years. The PS16 has a small rectangular fluid reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')
Supplied complete with lever and brake lever switch. Uses lever BRA28657 or BRA30605. Also known as Guzzi ref. 28660178. Can be used to replace round PS15 master cylinder BRA07338 and the discontinued PS16 Guzzi ref. 978606
This part is available by special order, request a quote
30660125 GU30660125 30 66 01 25
3066 0125 3066.0125 30.66.01.25
£225.00
INC VAT
£187.50 EX VAT
Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper
Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.
This part is due back in stock soon, call 01484 841395 to reserve yours
17652360 GU17652360 17 65 23 60
1765 2360 1765.2360 17.65.23.60
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT