Shop headings: New Spares | Used Spares | Accessories | Brands
Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simpifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. The kit consists of:
Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black to special order
This part is available by special order, request a quote
£459.60
INC VAT
£383.00 EX VAT
Camshaft upgrade with P3 profile which gives considerably more power and torque throughout the rev range than even the B10 camshaft.
This hot cam is ideal for fast street or racing use
This part is due back in stock soon, call 01484 841395 to reserve yours
14053340 14053301
£455.00
INC VAT
£379.17 EX VAT
Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simplifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. Replaces sump extension ENA14002. Finished in silver this is a great upgrade for your Guzzi. Uses oil filter SIA14530
Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black by special order - ENA14006
This part is available by special order, request a quote
£450.00
INC VAT
£375.00 EX VAT
Complete chromed Hepco and Becker rear luggage rack and pannier rails for Hepco and Becker panniers
To fit these frames, you may need to lower the tail light so this does not foul the rack. You may also need to drill the mudguard if you are to use the brace for the pannier frames. Pillion pegs may need moving forward slightly to accomodate panniers.
This part is available by special order, request a quote
£400.00
INC VAT
£333.33 EX VAT
7/33 pinion and crownwheel gear set
This part is available by special order, request a quote
17354650-z 17354650 GU17354650 17 35 46 50
1735 4650 1735.4650 17.35.46.50
£398.00
INC VAT
£331.67 EX VAT
Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 12 volt coils and can be used to replace points or Bosch electronic ignition on models with Bosch charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.
2 year warranty on Sachse ignition kits
Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. We recommend fitting Dyna coils ELA14101 with this kit. If you wish to combine this kit with uprated charging system ELA00502 you will need to make or source longer studs (M5 x 67mm x 2) for pickup, and longer centre bolt (M8 x 58mm wasted). See ACA50001 for distributor blanking plate if required
1 in stock
£395.00
INC VAT
£329.17 EX VAT
Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 3 Ohm 12 volt coils and can be used to replace points or Motoplat ignition on models with Saprisa charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.
2 year warranty on Sachse ignition kits
Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA31165
This part is available by special order, request a quote
£395.00
INC VAT
£329.17 EX VAT
Tough Xplorer top box / top case to match Hepco and Becker Xplorer panniers, ideal for enduro touring. Extremely endurable combination of black anodised aluminium sheet and coloured shock-resistant plastic.
This part is available by special order, request a quote
£391.00
INC VAT
£325.83 EX VAT
Set of high quality Ergal spur cut timing gears to replace the timing chain and sprockets. The crankshaft gear is steel, the oil pump and camshaft gears are alloy. These spur gears are much quieter than straight cut gears
This is a popular modification which improves high RPM reponse and eliminates backlash and slack in the engine timing resulting in improved perfomance - and you'll never need to retension your cam chain again! See this article for advice on fitting timing gears
Sorry, this part is no longer available.
Sorry this item is out of production
Agostini rearset kit comprising of black levers, footpeg hangers, fixed knurled alloy footpegs, necessary linkages and fittings. Retains standard silencer bracket position
This is a high quality Italian kit with black tubular footrest hangers which retains the looks of the original parts on a Le Mans 1 or Le Mans 2. Includes pillion footrests. To fit these to the NT version of the 1000 SP you will need to either fit upswept silencers and Le Mans type H pipe or fabricate suitable silencer brackets
This part is available by special order, request a quote
£385.00
INC VAT
£320.83 EX VAT