The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   4 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use. Replaces the existing sump drain plug
Consists of:

• Valve body, CNC precision turned part made of high quality steel
• Copper crush washer
• Hose connector, CNC precision turned part made of high quality steel
• High quality hose 40cm long
• Protection cover made of aluminum, anodized
• Illustrated Manual

One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards

 4 in stock

Dellorto mixture screw for PHF36 and PHM40 carbs

Check your mixture screw length as Guzzi used two lengths, this one and the screw in kit FUA93936

 4 in stock

 30936210 GU30936210 30 93 62 10
 3093 6210 3093.6210 30.93.62.10

Zinc finish M8 stud for drive box to swing arm union

4 required per bike

 4 in stock

 96508045 GU96508045 96 50 80 45
 9650 8045 9650.8045 96.50.80.45

Single T-shaped nylon fuel pipe connector for 6mm ID fuel pipe or breather pipe

 4 in stock

Premium softstyle royal blue T-shirt printed with classic Moto Guzzi logo in white on the chest.

Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!

Sizing:

• S fits 34 - 36" chest
• M fits 38 - 40" chest
• L fits 42 - 44" chest
• XL fits 46 - 48" chest
• XXL fits 50 - 52" chest

 4 in stock

Ninety degree angle extender for schrader tyre valves. Improves access to valve for tyre pressure checking

Suitable for 130/70 x 17, 140/70 x 17, 130/80 x 70, 120/90 x 17 tyres

 4 in stock

Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750

This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit

 3 in stock

 17659352 GU17659352 17 65 93 52
 1765 9352 1765.9352 17.65.93.52

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1

Short left hand choke cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 3 in stock

 17134050 GU17134050 17 13 40 50
 1713 4050 1713.4050 17.13.40.50

Nut for clutch centre gear CLA30810, fits on gearbox input shaft

See TOA14903 for special tool

 3 in stock

93601022-z 93601022 GU93601022 93 60 10 22
 9360 1022 9360.1022 93.60.10.22