Original type clutch friction plate for big twins

2 plates required per clutch overhaul- thicker side of each plate should face transmission. Also check your intermediate plate 12082300. This has shallower splines than the Spada 3 on plates. These are the best fit if you still have the original shallow spline clutch hub. Also known as Guzzi ref. 12084400

 This part is due back in stock soon, call 01484 841395 to reserve yours

28084460-z 28084460 GU28084460 28 08 44 60
 2808 4460 2808.4460 28.08.44.60

Upper screen fitting kit consisting of a pair of black fitting arms and all required washers and screws

To mount screen FAA60001, use in conjunction with lower mounting kit FAA60001A

 Availability varies on this part, check availability

Right hand Domino type starter switch for use with separate throttle, e.g. Tommaselli twin pull throttles ACA10500 or ACA10501

On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. If replacing 'Lego' type switchgear (e.g. Le Mans 2, V50) with integrated twistgrip you will need a separate twistgrip, see ACA10500 and ACA10501. Packaging may include explanation of switchgear wire covers. This type originally fitted as standard to the early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear.. Molex connectors available separately.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 01738800 GU01738800 01 73 88 00
 0173 8800 0173.8800 01.73.88.00

Complete gasket kit for all square barrel 1000 models

This is only a gasket set, it does not include oil seals and O rings. The top end O rings required are 12x ENA97624 and 2 x ENA90203

 This part is due back in stock soon, call 01484 841395 to reserve yours

29999000-z 29999000 GU29999000 29 99 90 00
 2999 9000 2999.9000 29.99.90.00

Ball bearing for drive box output side

 1 in stock

 92201070 GU92201070 92 20 10 70
 9220 1070 9220.1070 92.20.10.70

Upper Screen mounting kit in black. Consists of two long mount arms which clamp to the lower mounting kit. Includes necessary bolts and washers

Use with FAA60025 (lower kit) to mount a Screen

 This part is available by special order, request a quote

29577200-101

Pair of chromed Tommaselli handlebars, low rise

Also known as Guzzi ref. 30600310, 65600300, 17600360

 Availability varies on this part, check availability

 30600310 GU30600310 30 60 03 10
 3060 0310 3060.0310 30.60.03.10

Cam follower / tappet, standard size

Not for PI / hydraulic tappet models produced between 2003 and 2006

 2 in stock

 17045860 GU17045860 17 04 58 60
 1704 5860 1704.5860 17.04.58.60

Caliper rebuild kit for Brembo P9 calipers. This contains the 2 fluid seals, 2 dust seals, 2 bolts and the caliper half O-ring

This seal kit is for 48mm pistons. F09 / P9 caliper only originally used for rear applications. Also used on Benelli Sei rear

 1 in stock

High security ABUS alarmed disc lock.

What’s better than a secure lock? A secure lock with an alarm function.
As soon as you have activated the alarm tone on your lock, your lock is armed. If the lock experiences prolonged vibration, it will emit a 100 dB loud alarm signal. If you ever want to use your lock without the alarm function, a 5mm locking bolt made of specially hardened steel will secure your motorbike.
The ABUS “push down” cylinder is easy to operate and locks the bolt automatically.

In case you ever misplace the key, three keys are included in the scope of delivery. A CR2 battery is also included in the scope of delivery so that nothing stands in the way of immediate use.

 1 in stock

275