Large external side stand spring

 This part is due back in stock soon, call 01484 841395 to reserve yours

AP8221204

Swing arm bearing for gearbox casing

2 races required per bike. Also known as Guzzi ref. 2A000097

 2 in stock

92204215-z 92204215 GU92204215 92 20 42 15
 9220 4215 9220.4215 92.20.42.15

Set of leads for batter charging. Ring terminals for battery, 2 pin connector for charger to plug into. Often required if you charge more than one bike using your Motobatt Smart Charger

 2 in stock

Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers

Supplied with 4 crush washers. Also known as Guzzi ref. 95990033

 More than 5 in stock

95990028-z 95990028 GU95990028 95 99 00 28
 9599 0028 9599.0028 95.99.00.28

Also fits Laverda Jota

Single 100cm length of pipe used for oil return and breather applications depending on model. Can be used as gearbox breather on Tonti 5 speed gearboxes

Use hose clip FUA00004

 More than 5 in stock

823956080

500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.

See BRA99013 for high performance alternative.

If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area

 More than 5 in stock

Wood effect 60mm round Moto Guzzi badge for Hepco and Becker panniers

Guzzi pannier badge

 This part is available by special order, request a quote

Handy 70g tube of copper grease anti-seize paste

Use to prevent threaded studs, nuts and bolts form seizing

Please note this part CANNOT be posted outside of the UK mainland area

 This part is due back in stock soon, call 01484 841395 to reserve yours

One metre of copper core HT lead, this is superior to the more commonly available carbon core lead

Sold by the metre, one metre is enough for two leads on most models with coils under the fuel tank. For models with coils under the side panel you will need two metres. See ELA14715 and ELA14714 for plug caps and ELA20001 for coil screw cap. See ELA00001 for crimp on HT lead connector

 More than 5 in stock

Single 100cm length of neoprene rubber pipe used for oil breather applications depending on model. Can be used as fuel pipe on carb bikes. Also see FUA00011 as alternative for this pipe

Use hose clip FUA00004

 5 in stock