Page 4 of 33
Air Filter SIA10432 Fits Cali 1400, Griso 850, Griso 1100, Griso 1200, Stelvio, V85TT Dimensions: 180mm x 125mm x 38mm Air filter, flat paper cartridge type See SIA85433 for a reusable K & N air filter 1 in stock AP8104329 £10.50 INC VAT £8.75 EX VAT
Air Temperature Sensor ELA30330 Fits Breva ALL, 1200 Sport, Griso ALL, Norge ALL, Stelvio, Bellagio, Cali Vintage, Cali Aquila Nera, V7 Classic, Breva 750, V7 Cafe, Cali 1100 (1994-1997), Cali EV ALL, Cali Stone, Cali Jackal, V11 Sport ALL, 1100 Sport ALL, Daytona ALL, Centauro Marelli air temperature sensor Supplied with screws. Two required per engine Order now and we will post your order within 7 days. 30729330 GU30729330 30 72 93 30 3072 9330 3072.9330 30.72.93.30 £85.00 INC VAT £70.83 EX VAT
Alternator ENA05431 Fits Cali 1400 ALL, 1200 Sport, Breva 850, Breva 1100, Breva 1200, Griso ALL, Norge ALL, Stelvio 1200 Dimensions: Approx 160mm front to back, pulley OD 54mm Belt driven alternator Replaces Guzzi ref. GU05712431 This part is available by special order, request a quote 886255 MG886255 £420.00 INC VAT £350.00 EX VAT Alternator Belt ENA05530 Fits Cali 1400 ALL, 1200 Sport, Breva 850, Breva 1100, Breva 1200, Griso ALL, Norge ALL, Stelvio 1200 Alternator belt 1 in stock 05702530 GU05702530 05 70 25 30 0570 2530 0570.2530 05.70.25.30 £19.80 INC VAT £16.50 EX VAT
Alternator Nut Spacer ENA30201 Fits Bellagio, Breva ALL, V7 Cafe, V7 Classic, V7 Racer, Cali EV, Cali Aquila Nera, Cali Stone, Cali Jackal, Griso ALL, Norge ALL, Stelvio, 1200 Sport, Nevada 750 (1998-2009), V11 Sport, Mille GT, Cali 3, Cali 1100, Centauro, 1100 Sport ALL, Daytona, Strada 1000, 750X Dimensions: 16mm ID x 25mm OD Spacer for retaining nut for alternator rotor on models with Ducati type charging system 2 in stock 307144201 £9.00 INC VAT £7.50 EX VAT
Aluminium Master Cylinder Cap PS12 Brembo BRA14103 Fits S3, Convert, G5, Cali 2, Le Mans 1, Le Mans 2, Le Mans 3, T3, T4, V35 II, V50 3, V65 ALL, V75 (4 Valves Per Cylinder), 750 SP, 750 Targa, Strada 750, NTX 350, V35 II, V35 Florida, Cali EV, Cali Jackal, Nevada (1991 - 2003), Cali 1100 (Frame Nos KC12446 - KD12178), Cali Stone, 1200 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Norge ALL, Quota 1100, Stelvio, Bellagio Dimensions: 53mm OD Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models Make your Guzzi stand out from the crowd! This part is available by special order, request a quote 10430830 GU10430830 10 43 08 30 1043 0830 1043.0830 10.43.08.30 £32.50 INC VAT £27.08 EX VAT Angle Valve Extender WHA98001 Universal Part Dimensions: 90 degree Ninety degree angle extender for schrader tyre valves. Improves access to valve for tyre pressure checking Suitable for 130/70 x 17, 140/70 x 17, 130/80 x 70, 120/90 x 17 tyres 4 in stock £5.50 INC VAT £4.58 EX VAT
Automatic Bleed Valve M10 Single Banjo Bolt BRA41653 Universal Part Dimensions: M10 bolt with M6 bleed nipple The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:
- Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover 3 in stock
£33.00 INC VAT £27.50 EX VAT
Automatic Bleed Valve M6 Bleed Nipple BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL Dimensions: M6 x 16mm The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed. - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover More than 5 in stock
£26.50 INC VAT £22.08 EX VAT
Autosol Metal Polish 75ml Tube SIA30003 Universal Part Brilliant chrome, aluminium and metal polish. Make your Guzzi gleam. This part is due back in stock soon, call 01484 841395 to reserve yours £6.50 INC VAT £5.42 EX VAT Page 4 of 33
|