Shop headings: New Spares | Used Spares | Accessories | Brands
Oil pressure sender, M12 thread, male bullet connector
Supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.
See ENA12640 for replacement crush washer if required
More than 5 in stock
17768750 GU17768750 17 76 87 50
1776 8750 1776.8750 17.76.87.50
£10.00
INC VAT
£8.33 EX VAT
Cartridge oil filter UFI 23 149 00
Fits Daytona 1000 models where filter screws into base of sump. This is an 8 sided UFI filter.
Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump.
You may also require SIA10070 which is the crush washer for the drain plug and ENA14036 (sump gasket).
Please note that Daytona RS and T5 Polizia use filter SIA15300
More than 5 in stock
14153000 GU14153000 14 15 30 00
1415 3000 1415.3000 14.15.30.00
£10.50
INC VAT
£8.75 EX VAT
NGK BP6ES Spark plug
See SIA04055 for compatible high performance Iridium spark plug. See TOA00014 for spark plug spanner
More than 5 in stock
BP6ES
£3.30
INC VAT
£2.75 EX VAT
Pinion oil seal for rear drive box on small twins and rear wheel bearing oil seal for 850T
More than 5 in stock
90403247 GU90403247 90 40 32 47
9040 3247 9040.3247 90.40.32.47
£10.50
INC VAT
£8.75 EX VAT
Rubber bleed nipple cap with retaining ring
Suitable only for M8 and M10 bleed nipples
More than 5 in stock
£1.00
INC VAT
£0.83 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT
Stainless steel M8 nut
Many applications including gearbox, exhaust and bevel box mounts on big twins. Also used on small twins for bevel box mount bolts. Can be used in place of zinc finish nut 92606208
More than 5 in stock
£0.60
INC VAT
£0.50 EX VAT
A2 stainless socket cap screw M10 x 40, used for fork slider pinch bolts on 35mm big twin forks and 32mm small twin forks
More than 5 in stock
98620540 GU98620540 98 62 05 40
9862 0540 9862.0540 98.62.05.40
£1.50
INC VAT
£1.25 EX VAT
Stainless steel M6 dome head nut, many applications
Many applications including indicator mounting and securing exhaust flanges on V7 models
More than 5 in stock
92787006 GU92787006 92 78 70 06
9278 7006 9278.7006 92.78.70.06
£1.20
INC VAT
£1.00 EX VAT
Carb gasket kit / rebuild kit for Dellorto VHB29, VHB30, VHB24 and VHB26 carbs
Carb overhaul kit, fuel filter FUA60888 and float bowl seal FUA90001 available separately to this seal kit. As this kit is intended for several different carbs you may have gaskets or O rings remaining after rebuilding. More information on rebuilding your VHB carb can be found here.
More than 5 in stock
17939950 GU17939950 17 93 99 50
1793 9950 1793.9950 17.93.99.50
£12.50
INC VAT
£10.42 EX VAT