Shop headings: New Spares | Used Spares | Accessories | Brands
Replica dual seat. This is a high quality replica of the dual seat used on the V7 Sport, 750S and S3. Supplied with seat latch ready to bolt onto your rear sub-frame. This seat can be fitted to most early Tonti framed machines if a short S3 style rear mudguard is fitted
A high quality saddle manufactured in Italy. See MUA14437 for the short mudguard that fits with this seat
This part is available by special order, request a quote
14460540-z 14460540 GU14460540 14 46 05 40
1446 0540 1446.0540 14.46.05.40
£480.00
INC VAT
£400.00 EX VAT
Brand new eagle badge to replace the faded one on your top yoke nut
This part is due back in stock soon, call 01484 841395 to reserve yours
17517700 GU17517700 17 51 77 00
1751 7700 1751.7700 17.51.77.00
£6.60
INC VAT
£5.50 EX VAT
Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 12 volt coils and can be used to replace points or Bosch electronic ignition on models with Bosch charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.
2 year warranty on Sachse ignition kits
Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. We recommend fitting Dyna coils ELA14101 with this kit. If you wish to combine this kit with uprated charging system ELA00502 you will need to make or source longer studs (M5 x 67mm x 2) for pickup, and longer centre bolt (M8 x 58mm wasted). See ACA50001 for distributor blanking plate if required
1 in stock
£395.00
INC VAT
£329.17 EX VAT
Stainless steel fasteners kit for VHB carb models without sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike
This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 145 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)
More than 5 in stock
£85.00
INC VAT
£70.83 EX VAT
Complete replica sump for 850, 1000 and some 1100 models. Out of production for years, this is a good opportunity to replace a chipped or cosmetically damaged sump on your Guzzi
This part is available by special order, request a quote
14003500 GU14003500 14 00 35 00
1400 3500 1400.3500 14.00.35.00
£150.00
INC VAT
£125.00 EX VAT
Stainless steel drain plug for drive box and gearbox, includes recess for crush washer to locate in. Also used as level plug on big twins and front sump drain on small twins.
Also known as Guzzi ref. 95980212, 95980610. Use crush washer SIA10900 with this bolt
More than 5 in stock
95980214-z 95980214 GU95980214 95 98 02 14
9598 0214 9598.0214 95.98.02.14
£9.90
INC VAT
£8.25 EX VAT
One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area.
See BRA99014 for high performance alternative
More than 5 in stock
£13.75
INC VAT
£11.46 EX VAT
500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.
See BRA99013 for high performance alternative.
If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£7.92
INC VAT
£6.60 EX VAT
One piece collet for exhaust manifold, one required per cylinder
No longer in production
This part is available by special order, request a quote
14121200 GU14121200 14 12 12 00
1412 1200 1412.1200 14.12.12.00
£15.00
INC VAT
£12.50 EX VAT
Chromed crossover pipe with two crossover pipes
This part is available by special order, request a quote
14123900-z 14123900 GU14123900 14 12 39 00
1412 3900 1412.3900 14.12.39.00
£115.50
INC VAT
£96.25 EX VAT