The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   4 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Bearing spacer for spoked rear wheel

 This part is available by special order, request a quote

 17634050 GU17634050 17 63 40 50
 1763 4050 1763.4050 17.63.40.50

"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.

 3 in stock

Pair of red and white tank decals with pinstripes

 This part is available by special order, request a quote

 14916201 GU14916201 14 91 62 01
 1491 6201 1491.6201 14.91.62.01

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement

 More than 5 in stock

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Replacement steering lock with 2 keys, fits into headstock

See FRA28551 for the steering lock cover flap and rivet. Also known as Guzzi ref. 12782830, 19782520

 2 in stock

 28782550 GU28782550 28 78 25 50
 2878 2550 2878.2550 28.78.25.50

Lightweight M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins). An aluminium filler plug made in Italy.

 1 in stock

 12022600 GU12022600 12 02 26 00
 1202 2600 1202.2600 12.02.26.00

Little end or con rod bush

Also known as Guzzi ref. 91112128, 91112124, 91112127, 91112123, 91112122. Note that little end bushes may need reaming to suit your conrod and gudgeon pin

 This part is due back in stock soon, call 01484 841395 to reserve yours

 91112128 GU91112128 91 11 21 28
 9111 2128 9111.2128 91.11.21.28

Black stainless steel Moto Guzzi water bottle with carabiner handle. Perfect for touring or days out on your Guzzi. You could even sneak a drop of something warming into it

 This part is available by special order, request a quote

606501M

Stainless steel front engine mounting stud kit. Kit contains one long engine M12 x 1.25 threaded stud (with plain section in centre), two M12 half nuts, two M12 crinkle washers and four standard M12 washers - all in A2 stainless steel

The original bolts are prone to seizing in place so we recommend replacing with this quality stainless part. Also known as Guzzi ref. 03429500, 14429505
Differs from original part whcih is a bolt, this stud make is easier to fine tune the position of the stud between header pipes

 This part is available by special order, request a quote

 14429500 GU14429500 14 42 95 00
 1442 9500 1442.9500 14.42.95.00