Shop headings: New Spares | Used Spares | Accessories | Brands
Starter ring gear
See ENA98420 for bolts
This part is available by special order, request a quote
17067900 GU17067900 17 06 79 00
1706 7900 1706.7900 17.06.79.00
£195.00
INC VAT
£162.50 EX VAT
Clutch plate kit consisting of 2 x friction plates, 1 x intermediate plate, deep splined clutch centre / boss and tabbed lock washer (not shown). For models with the early type shallow spline plates this is a worthwhile upgrade kit to the better deep splined centre and plates. Clutch plate alignment tool also available, see TOA30510. Suitable for all 5 speed dual plate clutch models
Save £20 on the cost of these components if bought seperately. Does not include clutch springs (see CLA13100). Thicker side of each friction plate should face transmission
This part is due back in stock soon, call 01484 841395 to reserve yours
£186.50
INC VAT
£155.42 EX VAT
Pair of stylish Kappa soft panniers, perfect for V7 and V9 models.
Order now and we will post your order within 7 days.
£168.00
INC VAT
£140.00 EX VAT
Mechanical Bosch voltage regulator
- Nominal current: 25 amps - Nominal voltage: 14V - Length: 120 mm - Width: 70 mm - Height: 80 mm
This part is available by special order, request a quote
12703805-z 12703805 GU12703805 12 70 38 05
1270 3805 1270.3805 12.70.38.05
£165.00
INC VAT
£137.50 EX VAT
Rear main bearing flange, first oversize: + 0.2mm
This part is available by special order, request a quote
12011401 GU12011401 12 01 14 01
1201 1401 1201.1401 12.01.14.01
£165.00
INC VAT
£137.50 EX VAT
Reconditioned starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. See ELA14738 for replacement solenoid.
This may fit Loop frame models with 5 speed gearboxes, you will need to trim a clearance into the battery tray to make room. The clutch cable bracket will prevent fitment on 4 speed models.
This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address. NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts. Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place
1 in stock
14730554 GU14730554 14 73 05 54
1473 0554 1473.0554 14.73.05.54
£155.00
INC VAT
£129.17 EX VAT
Motobatt quadflex 30Ah battery. Quadflex technology means you have two positive and two negative threaded terminals allowing maximum flexibility when installing. This powerful battery produces a massive 390 cranking amps, and is rated at 32 ah.
These sealed absorbed glass matt batteries have been used in military and off road applications for many years.
They offer increased lifespan, higher vibration resistance and electrical performance. This battery is also leak, vibration and spill proof if installed correctly.
Supplied fully charged and ready to fit.
NB This battery must not be trickle charged or charged using a traditional manual charger, AGM batteries require a smart charger - we recommend ACA96000
For more information on charging AGM batteries see these FAQ's.
This is a better value replacement for the Odyssey PC925 battery. Replaces Guzzi refs. 14704550, 18704550, 28704550, 28704545, 28704551, 28704552, 14704551, 14704500 and 14704505
One year warranty on all our Motobatt batteries.
Slightly taller than original loop frame battery so you may need to make some modification to retaining bracket
Please note this part CANNOT be posted outside of the UK mainland area
1 in stock
03704540-z 03704540 GU03704540 03 70 45 40
0370 4540 0370.4540 03.70.45.40
£155.00
INC VAT
£129.17 EX VAT
Reconditioned Valeo starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. Minor modification may be required on some pre 1990 models to make room for the solenoid. Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology. See , see this link for the modifications required to fit a Valeo starter to a 4 speed model.
This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address.
NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts.
Also known as Guzzi ref. 30730710
Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£155.00
INC VAT
£129.17 EX VAT
Replacement clutch plate for single plate RAM clutches
Torque setting for fitting this is 25Nm with a thread locking compound
This part is available by special order, request a quote
£146.00
INC VAT
£121.67 EX VAT
Rear main bearing flange
This part is available by special order, request a quote
12011400-z 12011400 GU12011400 12 01 14 00
1201 1400 1201.1400 12.01.14.00
£145.00
INC VAT
£120.83 EX VAT