Five piece decal set, gold lettering. Three larger decals, two smaller decals

 This part is due back in stock soon, call 01484 841395 to reserve yours

Five piece decal set, white lettering. Three larger decals, two smaller decals

 3 in stock

"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.

 3 in stock

Special tool for tightening and untightening the dipstick on small twins. The dipstick can be awkward to undo on these models but this tool makes it simple and quick. No more struggling to grip it or resorting to pliers, just use our tool.

Oil filler tool manufactured from PETG filament these are fully recyclable but as strong as ABS. Dipstick spanner 3D printed in the UK

 2 in stock

 14927001 GU14927001 14 92 70 01
 1492 7001 1492.7001 14.92.70.01

Domino left hand switchgear with lights on - park - off, high and low beam, pass, indicator and horn switches. Same style switch as ELA01738.

Already wired in to 9 pin block connector (you may need to alter the wiring on your bike to correspond to this block connector). Originally fitted as standard to early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear. See Greg Bender's website for a custom sub-loom that enables easy fitting of this part to models previously fitted with LEGO style swithgear. Small block models will require an adapter to retain all the switch functions.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 01738030 GU01738030 01 73 80 30
 0173 8030 0173.8030 01.73.80.30

Magnetic oil drain plug for engine sump or filler plug for drive box and gearbox

Can also be fitted to V7 Sport, 750S, 850 GT and other early big twins which originally had a plain drain plug. May be supplied in either black or silver finish.. See SSA12600 and ACA12600 for stainless or aluminium versions of this part

 2 in stock

 12003702 GU12003702 12 00 37 02
 1200 3702 1200.3702 12.00.37.02

Rear drive flange, locates in cush drive

 Sorry, this part is no longer available.

 19351401 GU19351401 19 35 14 01
 1935 1401 1935.1401 19.35.14.01

Splined driveshaft coupling for driveshaft

Supercedes Guzzi ref. 19327701

 This part is available by special order, request a quote

 31327783 GU31327783 31 32 77 83
 3132 7783 3132.7783 31.32.77.83

Metal eagle badge used on yoke and solenoid cover

 This part is due back in stock soon, call 01484 841395 to reserve yours

 01517700 GU01517700 01 51 77 00
 0151 7700 0151.7700 01.51.77.00

Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with 12 volt 3 Ohm coils ELA14500 (big twins) and can be used to replace Digiplex on models with Ducati charging systems where the bike is converted to carburettors. This kit is just an ignition system, it will not control fuelling. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.

2 year warranty on Sachse ignition kits

Once fitted no further adjustment should be necessary. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. See this link for fitting instructions. Some bikes may need at least one additional spacer to allow enough clearance for alternator cover to fit once pickup is fitted. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA14500

 This part is available by special order, request a quote