Pair of chrome reverse cone mega type silencers supplied with shims to allow fitment to a variety of models. Adjustable mounting bracket and clamp included.

You may need to modify brackets or fabricate your own depending upon which model you have

 This part is available by special order, request a quote

Complete ignition switch with lock number, keys and steering lock plate

4 pin superseal connector included, Zadi switch has 4 positions

 Sorry, this part is no longer available.

 01782500 GU01782500 01 78 25 00
 0178 2500 0178.2500 01.78.25.00

High performance aluminium velocity stack for airbox to throttle body union on single throttle body models. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 This part is due back in stock soon, call 01484 841395 to reserve yours

Clutch friction plate

 This part is available by special order, request a quote

2A000770

Replacement regulator rectifier for models fitted with the Ducati charging system. This is a quality unit and is supplied with fitting instructions

Connections: 2 x yellow male bullet, 1 x white female bullet, 1 x black ring, 1 x red ring. You will need to reuse your existing block connectors to connect this to your loom. See this wiring diagram for wiring connections

 This part is due back in stock soon, call 01484 841395 to reserve yours

37703805-z 37703805 GU37703805 37 70 38 05
 3770 3805 3770.3805 37.70.38.05

Rocker cover or head cover

Fits left and right hand cylinders

 This part is available by special order, request a quote

 887523 MG887523

Rear brake master cylinder, foot operated. Brembo no longer offer overhaul kits for recent models so this is your only option if your master cylinder is faulty.

 This part is available by special order, request a quote

2B000508

Clutch friction plate

Also known as Guzzi ref. 27084460

 3 in stock

32084410-z 32084410 GU32084410 32 08 44 10
 3208 4410 3208.4410 32.08.44.10

Pair of Wirth progressive fork springs

These progressive fork springs improve ride quality and handling by responding progressively to the road. The more the spring is compressed the harder it becomes preventing the forks from bottoming out.

 This part is available by special order, request a quote

The BoosterPlug is an effective and cost efficient way to cure the fuelling problems on twin throttle body V7 mark 1 models.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!

• Improved and gentler throttle action when opening and closing throttle
• Richer mixture when opening the throttle improves acceleration
• Removes the uneven low speed running that is typical for modern lean burn engines
• Stronger and more consistent at idle.
• Reduced backfiring with aftermarket exhausts on engine braking
• Improved fuel economy