Clutch friction plate

Also known as Guzzi ref. 27084460

 3 in stock

32084410-z 32084410 GU32084410 32 08 44 10
 3208 4410 3208.4410 32.08.44.10

Pair of Wirth progressive fork springs

These progressive fork springs improve ride quality and handling by responding progressively to the road. The more the spring is compressed the harder it becomes preventing the forks from bottoming out.

 This part is available by special order, request a quote

The BoosterPlug is an effective and cost efficient way to cure the fuelling problems on twin throttle body V7 mark 1 models.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!

• Improved and gentler throttle action when opening and closing throttle
• Richer mixture when opening the throttle improves acceleration
• Removes the uneven low speed running that is typical for modern lean burn engines
• Stronger and more consistent at idle.
• Reduced backfiring with aftermarket exhausts on engine braking
• Improved fuel economy

The BoosterPlug is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!

• Improved and gentler throttle action when opening and closing throttle
• Richer mixture when opening the throttle improves acceleration
• Booster plug removes the uneven low speed running that is typical for modern lean burn engines
• Stronger and more consistent at idle.
• Reduced backfiring with aftermarket exhausts on engine braking
• Lifetime warranty

 This part is due back in stock soon, call 01484 841395 to reserve yours

Bridgestone Battlax 110/90-18 speed rated to 130 MPH.

Bridgestone's Battlax BT46 replaces the iconic Battlax BT-45. The iconic BT-45 was upgraded with a new modern design that increases wet performance with no impact on its well-known dry handling performance and high mileage. RC Polymer technology optimizes the distribution of silica in the rubber compound and improves tread flexibility, allowing greater contact with the road surface in both hot and cold conditions. The reduction in molecular friction also improves rolling resistance, therefore increasing fuel economy.

 Order now and we will post your order within 7 days.

BT46

Pair of sturdy black ABS handguards with fitting hardware, these protect clutch and brake levers from damage as well as providing some weather protection for your hands. Supplied as a pair, a great accessory for UK riding conditions

Single point mounting for easy installation, bar end weights are retained.

 This part is available by special order, request a quote

T shaped fuel pipe assembly with quick release connector and injector connectors

 This part is available by special order, request a quote

2B000970

Polished chrome alternator cover for small twins with Guzzi eagle motif

A great way to brighten up the front of your engine. The stock black plastic spacer is required to fit this part to models with Ducati charging systems (i.e. Breva 750, late Nevadas, V7 Classic and Cafe), please call to order if your bike isn't already fitted with this part. Also known as Guzzi ref. 32001610 and 19001620. NB not for V50 II or V35 I which use ACA18650

 1 in stock

27001636-z 27001636 GU27001636 27 00 16 36
 2700 1636 2700.1636 27.00.16.36

Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.

 1 in stock

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Pair of Hagon progressive fork springs

These progressive fork springs improve ride quality and handling by responding progressively to the road. The more the spring is compressed the harder it becomes preventing the forks from bottoming out. Supplied with instructions, see OIA02075 for fork oil

 This part is available by special order, request a quote