Shop headings: New Spares | Used Spares | Accessories | Brands
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs
Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is available by special order, request a quote
23526410-z 23526410 GU23526410 23 52 64 10
2352 6410 2352.6410 23.52.64.10
£229.00
INC VAT
£190.83 EX VAT
Complete Newtronic electronic ignition kit containing ignition pickup (distributor mounted) and ignition box. Retains original mechanical advance / retard mechanism.
Kit consists of sensor plate and pickups, magnet, ignition box, clip, screws and instructions.
Suitable for all models originally fitted with points which have a mechanical advance / retard . Coils should have 4 Ohms resistance on the low tension circuit, OE coils will work OK but you may see improved results with high performance Dyna coil ELA14101
Developed from the original Piranha system, Newtronic ignitions are contact breaker replacement ignition systems covering a range of Japanese and European motorcycles from the late 1950's onwards. Using contactless, maintenance free, infra red triggering the Newtronic ignition has gained a reputation for ease of installation and effectiveness from satisfied motorcyclists around the World. The switching units include an integrated timing LED for each channel, making it quick and easy to accurately time each cylinder independently (an essential step in gaining the best performance from your engine.). The system typically consists of three main components:
1 in stock
£225.00
INC VAT
£187.50 EX VAT
Pair of chrome exhaust header pipes
NB balance pipe shown is not included, available as EXA19135
Sorry, this part is no longer available.
19120735+19120736
Sorry this item is out of production
Brand new UJ
12 spline driveshaft and universal joint, universal coupling or cardan joint.
This part is available by special order, request a quote
23328081 GU23328081 23 32 80 81
2332 8081 2332.8081 23.32.80.81
£215.00
INC VAT
£179.17 EX VAT
Pair of quality YSS rear shock absorbers, milled aluminium body with black springs. These fit series 1 Nevada 750 models (those originally fitted with Bitubo shocks)
Continuous preload adjustment, fully rebuildable
This part is available by special order, request a quote
£215.00
INC VAT
£179.17 EX VAT
Pair of YSS rear shock absorbers, milled aluminium body with black springs.
Continuous preload adjustment, fully rebuildable. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks
1 in stock
£210.00
INC VAT
£175.00 EX VAT
Pair of YSS rear shock absorbers, milled aluminium body with black springs.
Continuous preload adjustment, fully rebuildable
This part is available by special order, request a quote
£210.00
INC VAT
£175.00 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Complete left hand PHBH28 carb, supplied ready to fit with cable elbow
Jetted to suit your model.
42mm Plain air intake connection.
36mm rubber sleeve type engine connection.
Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 300710715 and 23112671
This part is available by special order, request a quote
19112681 GU19112681 19 11 26 81
1911 2681 1911.2681 19.11.26.81
£205.00
INC VAT
£170.83 EX VAT
Complete right hand PHBH28 carb, supplied ready to fit with cable elbow
Jetted to suit your model.
42mm Plain air intake connection.
36mm rubber sleeve type engine connection.
Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 300710715 and 23112671
This part is available by special order, request a quote
19112680 GU19112680 19 11 26 80
1911 2680 1911.2680 19.11.26.80
£205.00
INC VAT
£170.83 EX VAT