Shop headings: New Spares | Used Spares | Accessories | Brands
High performance Quadflex maintenance free AGM Motobatt 12 volt 19Ah battery. Quadflex technology means you have two positive and two negative threaded terminals allowing maximum flexibility when installing. Motobatt absorbed gel matting batteries feature the latest absorbent glass mat technology. This offers increased lifespan, higher vibration resistance and electrical performance. This battery is also leak, vibration and spill proof if installed correctly
Suitable as a replacement for Guzzi ref. 03704571. If fitted to CARC models the top battery securing bracket will need to be omitted or modified as this battery has a different profile to the OE Yuasa battery.
Supplied charged and ready to fit, Motobatt Quadflex batteries produce 20% more cranking power (250 CCA) and are spill proof. This battery is physically smaller than the original battery fitted to some V35, V50 and V65 models, it may require packing out in the battery compartment.
NB This battery must not be trickle charged or charged using a traditional manual charger, AGM batteries require a smart charger - we recommend ACA96000
For more information on charging AGM batteries see these FAQ's.
Can also be used to replace Odyssey PC925L where a bike is in regular use (this battery should be installed on its side).
One year warranty on all our Motobatt batteries
Also available at the same price in black by special order - call 01484 841395 to order
Please note this part CANNOT be posted outside of the UK mainland area
Availability varies on this part, check availability
883818 MG883818
£98.00
INC VAT
£81.67 EX VAT
Polished aluminium alternator cover
This is the deeper alternator cover which is suitable for models with Ducati and Saprisa charging systems. It is not compatible with sleeve ENA14710.
See SSA06030 for stainless steel mounting bolts (4 required)
2 in stock
18001650-z 18001650 GU18001650 18 00 16 50
1800 1650 1800.1650 18.00.16.50
£97.00
INC VAT
£80.83 EX VAT
Brand new right hand original "Lego" type switchgear and twistgrip with switches for starter and run/kill.
Previously unavailable new and ideal for your restoration project.
Comes with attached 4 pin molex connector, molex pins and rubber boot, ready to be plugged into your standard loom.
Twistgrip for standard dual throttle cables.
See ELA17061 and ELA14055 for left hand switches.
Sorry, this part is no longer available.
Sorry this item is out of production
Rectifier / diode board for Bosch charging systems. High quaility replacement part sourced from Germany
See our Bosch fault finder page for help diagnosing problems on your Bosch charging system.
This part is due back in stock soon, call 01484 841395 to reserve yours
17704300-z 17704300 GU17704300 17 70 43 00
1770 4300 1770.4300 17.70.43.00
£95.00
INC VAT
£79.17 EX VAT
Complete shallow bowl 190mm gloss black headlight unit.
Fits Le Mans 1 headlamp cowling FAA99575. Supplied complete with bulb and three short wires (without connectors). NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems. Neutral beam pattern and not E Marked
This part is due back in stock soon, call 01484 841395 to reserve yours
£95.00
INC VAT
£79.17 EX VAT
Replacement alternator rotor for Bosch systems
See ELA17400 for matching stator and TOA14008 for rotor removal tool. We recommend changing the timing cover oil seal ENA90428 when changing the rotor. Also fits Yamaha RD350, FZR1000 and 1000 Fazer. Note that new rotors may need energizing, see our faultfinder for details.
This part is due back in stock soon, call 01484 841395 to reserve yours
Also fits Benelli 900 Sei (Series 2)
£93.00
INC VAT
£77.50 EX VAT
Complete rear light or tail lamp including plastic shroud, lens, light fitting and steel mounting bracket
Rare and previously unobtainable new. Can be used to replace tail light on Lario and Le Mans 1000, note that this one does not have side 'wings' but is functional on these models
This part is due back in stock soon, call 01484 841395 to reserve yours
19750900 GU19750900 19 75 09 00
1975 0900 1975.0900 19.75.09.00
Also fits Benelli 900 Sei
£88.30
INC VAT
£73.58 EX VAT
Chromed fork stanchion
This part is available by special order, request a quote
27525420 GU27525420 27 52 54 20
2752 5420 2752.5420 27.52.54.20
£88.20
INC VAT
£73.50 EX VAT
Left hand Domino type switchgear with high and low beam, pass, indicator and horn switches. Same style switch as ELA01738
On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. An indication of wire colours is supplied with this switchgear. Supplied with 9 pin block connector. NB does not have lights off - park - on function, you need this to be on your RH switch (e.g. ELA01729 ) or run lights always on
This part is available by special order, request a quote
£88.00
INC VAT
£73.33 EX VAT
Domino left hand switchgear with lights on - park - off, high and low beam, pass, indicator and horn switches. Same style switch as ELA01738.
Already wired in to 9 pin block connector (you may need to alter the wiring on your bike to correspond to this block connector). Originally fitted as standard to early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear. See Greg Bender's website for a custom sub-loom that enables easy fitting of this part to models previously fitted with LEGO style swithgear. Small block models will require an adapter to retain all the switch functions.
This part is due back in stock soon, call 01484 841395 to reserve yours
01738030 GU01738030 01 73 80 30
0173 8030 0173.8030 01.73.80.30
£88.00
INC VAT
£73.33 EX VAT