Shop headings: New Spares | Used Spares | Accessories | Brands
Replacement fuel pump
For models with the fuel pump mounted external to the fuel tank. No longer available new from Guzzi. Also known as Guzzi ref. 29107261 and 29107260
1 in stock
01107231 GU01107231 01 10 72 31
0110 7231 0110.7231 01.10.72.31
£140.00
INC VAT
£116.67 EX VAT
Replacement regulator rectifier for models fitted with the Ducati charging system. This is a quality unit and is supplied with fitting instructions
Connections: 2 x yellow male bullet, 1 x white female bullet, 1 x black ring, 1 x red ring. You will need to reuse your existing block connectors to connect this to your loom. See this wiring diagram for wiring connections
This part is due back in stock soon, call 01484 841395 to reserve yours
37703805-z 37703805 GU37703805 37 70 38 05
3770 3805 3770.3805 37.70.38.05
£138.00
INC VAT
£115.00 EX VAT
One piece rear disc.
Note that this brake disc has 12mm ID mounting holes, you may require bushes if using 8mm bolts. Also known as Guzzi ref. 37635705, 30635731. Always fit new brake pads when replacing a brake disc - BRA27611 or BRA11498
This part is available by special order, request a quote
30635701 GU30635701 30 63 57 01
3063 5701 3063.5701 30.63.57.01
£138.00
INC VAT
£115.00 EX VAT
22 teeth 3rd gear for gearbox layshaft. Helical 3rd gear
This part is available by special order, request a quote
14214810 GU14214810 14 21 48 10
1421 4810 1421.4810 14.21.48.10
£135.00
INC VAT
£112.50 EX VAT
Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint
To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005
Availability varies on this part, check availability
14003240 GU14003240 14 00 32 40
1400 3240 1400.3240 14.00.32.40
£128.00
INC VAT
£106.67 EX VAT
6 dog 28 tooth 5th gear
This part is available by special order, request a quote
14122013 GU14122013 14 12 20 13
1412 2013 1412.2013 14.12.20.13
£128.00
INC VAT
£106.67 EX VAT
Output flange for drive box, engages with the driveplate on the wheel
Also known as Guzzi ref. 17351401. 8 hole M8 fixing in flange
This part is available by special order, request a quote
17351400 GU17351400 17 35 14 00
1735 1400 1735.1400 17.35.14.00
£125.00
INC VAT
£104.17 EX VAT
Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.
This part is due back in stock soon, call 01484 841395 to reserve yours
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£125.00
INC VAT
£104.17 EX VAT
Set of 3 piston rings for Nikasil 92mm bore
Only for Cali 1100 frame prefixes KC and KD, for KG and KH prefixes see ENA18601
This part is available by special order, request a quote
30060660-z 30060660 GU30060660 30 06 06 60
3006 0660 3006.0660 30.06.06.60
£123.50
INC VAT
£102.92 EX VAT
Timing sensor for ignition and tacho
3 pin block connector. Used on models with the smaller 15M ECU
Order now and we will post your order within 7 days.
01721600 GU01721600 01 72 16 00
0172 1600 0172.1600 01.72.16.00
£115.00
INC VAT
£95.83 EX VAT